Announcement

Collapse
No announcement yet.

Feeler: FS/FT my s52 e30

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Feeler: FS/FT my s52 e30

    PRICE UPDATE!!!! CARS IS OFFICIALLY BACK UP FOR SALE!!!

    I would be willing to sell it for anywhere between $7-8k, depending on what goes with the car.

    Meet Scarlet:








    Drivetrain



    '98 OBD1 s52 from a 98 m3 (approximately 85k on motor, with 195-197 psi across all 6 cylinders)

    ZF320 5 spd from same m3

    3.46 LSD (perfect gearing)

    A/C condenser, compressor and bracket removed. I still have the bracket and compressor, but no condenser/fan.

    3.5" HFM

    24lb injectors

    custom intake set-up

    ebay SS long tube headers

    High flow, single 2.5" exhaust

    13lb LTW flywheel

    RMS custom dyno tune - roughly 230whp/225wtq

    16" Electric fan





    Suspension


    Front:

    GC Coil-over sleeve, shortened strut tube, welded collar, and 350lb spring

    Bilstein sport strut inserts

    E30 M3 sway bar link conversion

    Ireland Engineering 22mm sway bar

    Polyurethane Control Arm Bushings

    Polyurethane steering coupler

    '97 e36 m3 quick ratio steering rack

    Rear:

    e36 m3 Eibach pro kit springs + dual thickness spring pads, 420lb progressive rate (much better than when I had 500lb coil-over springs, linear rate is too stiff for launching and would kick on corners)

    Bilstien sport shocks

    IE 19mm 2 way adjustable rear sway bar, with reinforced mounting tabs

    IE polyurethane: rear trailing arm bushings, and control arm bushings

    Brakes


    Front:

    Ate Powerslot rotors

    Mintex Red pads

    SS brake lines

    e21 modified brake booster (smaller booster required for motor swap)

    Summit Racing vacuum reserve canister (to make up for the brak assist lost from goin to a smaller booster)

    Rear:

    Brembo blank rotors

    Mintex red brake pads

    Wheels

    17x8 et37 OZ Superturismo wheels powdercoated Satin Black

    20mm hub-centric spacers all around

    235/40/17 Falken FK452



    Interior

    Mint black vinyl comfort interior



    Possibly some Sparcos

    Exterior

    US ellipsoid smoked low beams, no highbeams

    55w 6k HIDs

    Volvo lip up front (lost my iS lip on the freeway a couple months ago

    Zender rear spoiler

    Smoked Hella ellipsoid low beams, with 6k 55W HIDs

    Professionally smoked stock tail lights

    Rear euro plate filler

    Shadow line trim
    [B]

    Car handles amazing, I've put a lot of work into the car to get it handling as neutral as it does. It's also really quick, and surprises the hell out of everyone. I pull on e46 m3s, 335s, Mustang GTs, etc. I've put a lot of time, effort and money into this car, and I want it to go to someone that'll take care of it.

    Let me know if you're interested. I have a a few people interested already. Keep me posted.

    Chris
    Last edited by e30polak; 04-24-2010, 10:35 AM.
    Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc

    INSTAGRAM: @UNDR8D_EMPIRE

    Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356

    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    #2
    you're going from a setup swapped e30 to a turbo e24? you might want to reconsider. you will probably be very disappointed in the handling, etc of the 6er.
    ______________________
    ex-Chief Operating Officer
    Blunt Tech Industries
    West Coast and Pacific Rim

    Comment


      #3
      Originally posted by hugh jass View Post
      you're going from a setup swapped e30 to a turbo e24? you might want to reconsider. you will probably be very disappointed in the handling, etc of the 6er.
      Don't worry. I'm going to basically gut the 6er, should be between 3000-3200lbs when I'm done with it. Full coil-overs, poly-urethane bushings, upgraded steering box, sway bars, light weight wheels, BBK, full cage, etc.

      I want a car that can reliably handle 500whp/500wtq, and also put down the power. It will handle really well, maybe not quite as good as my e30, but I will give up some handling for a MUCH better power band.
      Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc

      INSTAGRAM: @UNDR8D_EMPIRE

      Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356

      Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

      Comment


        #4
        Dude your mind changes with the weather... Keep it and do the turbo!
        Turbo E30
        Roadkill 80lb 93 octane OBDI tune
        BavSol Cylinder Head
        Stock S50 in. cam Schrick ex. cam
        Otis' tubular T4 manifold
        Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
        GT4094r w/Batmowheel Impeller
        614whp@17.5psi, 100 Oct
        690whp@21psi, 100 Oct
        801whp@27psi, 110 URT
        Old: 1/4 mile: 10.91@144.38 (636whp)
        New: ?
        http://www.youtube.com/watch?v=L_f7fUVqblI

        Comment


          #5
          Originally posted by rneedham1979 View Post
          Dude your mind changes with the weather... Keep it and do the turbo!
          It does, I guess I really embrace the Cancer sign lol.

          I've been doing a lot of research, and I honestly am board of the e30. I've driven it daily for over 3 years, and I simply want to start a different project.

          I've put too much into the e30 already, and I can build a sick 6 series for the money that I'll get for my e30. It may not handle quite as well, but it will handle great when I'm done with it. I will be gutting the 6 pretty good, putting my Sparco revs I have in it, coil-overs, sway bars, poly bushings all around, cambers/caster plates, custom fender flares and eventually a full cage. It will also have a CARB legal turbo kit on it that makes 308whp/398wtq on 9 psi. With ARP bolts, a tubular manifold, and a ball bearing GT35r I will easily make 500whp in a car that will put down the power MUCH better than my e30.

          I've always liked the 6 series, and I eventually want to put an s62 with a 6spd, and e39 m5 brakes in the one that I build.

          Don't worry, the shark I will build is going to be sinister. :twisted:
          Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc

          INSTAGRAM: @UNDR8D_EMPIRE

          Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356

          Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

          Comment


            #6
            Local

            PM'd

            Comment


              #7
              Ive driven and ridden in this car. Its fun. Much more so than the boat replacing it. Get it before he changes his mind.

              Comment


                #8
                damn nice. wont last, someone lucky will grab this bad girl asap.
                sigpic
                New website releasing soon www.gutenparts.com Guten Parts + Service | Facebook | Twitter
                ____________________________________

                Levent
                %20levent@gutenparts.com

                ____________________________________
                Ladies:
                1998 E36 m3/4/5 1988 325i 1989 325iT

                Comment


                  #9
                  Originally posted by Stephen View Post
                  Ive driven and ridden in this car. Its fun. Much more so than the boat replacing it. Get it before he changes his mind.
                  You have no idea of what my plans are for the boat replacing it. It will be MUCH faster then my e30. :twisted:

                  Plus I can always build another e30 down the line. There are much fewer nicely done e24s rolling around. :roll:
                  Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc

                  INSTAGRAM: @UNDR8D_EMPIRE

                  Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356

                  Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                  Comment


                    #10
                    Meh.

                    Comment


                      #11
                      ill take you in the twisties

                      Comment


                        #12
                        Weak, Turbo this bitch and be done with it.

                        Comment


                          #13
                          If the heavens aligned and I could squeeze out $8,500, I would in a heart beat, man.
                          Need a part? PM me.

                          Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

                          Comment


                            #14
                            Originally posted by Stephen View Post
                            ill take you in the twisties
                            That's ok. I'm going to build a 2002 or a 510 next, and both of those will rape you in the twisties. :p

                            Originally posted by White325is View Post
                            Weak, Turbo this bitch and be done with it.
                            It's not worth it for me Mike. I don't want to throw any more money at this car that I'll never see back. Plus, for my power goals, the e24 will be a much better choice.

                            With the turbo set-up on the 6, it's a factory Dinan option. Therefore I can legally smog the car, and still make fucking nutty numbers! :D

                            I will build another small car later on for pure track use, but for now I want something a little more baller, and a lot faster! :pimp:

                            Originally posted by ck_taft325is View Post
                            If the heavens aligned and I could squeeze out $8,500, I would in a heart beat, man.
                            You wouldn't get close to everything for that price. I'm looking for someone to buy everything with the car, and that will be the $11k price tag. If I need to part some stuff later to sell it, then maybe we can talk. ;)
                            Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc

                            INSTAGRAM: @UNDR8D_EMPIRE

                            Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356

                            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

                            Comment


                              #15
                              Originally posted by e30polak View Post
                              That's ok. I'm going to build a 2002 or a 510 next, and both of those will rape you in the twisties. :p


                              ill take you with my ruckus

                              Comment

                              Working...
                              X