CA: 1987 325is 2-dr 5-sp Euro Bumpers BBS

[BrewCity11]

For sale is my 1987 325is. This car was purchased and rebuilt for my July road trip.

VIN: WBAAA1305H2325811

200,000 miles on chassis, 145,000 on motor and over 4,000 miles since rebuild, July 4th.

The car was completely stripped down, rust holes cut out, POR-15'd, with patch panels either welded or panel bonded in place.
The engine bay was sprayed with Rustoleom Truck Bedliner and the exterior was shot with John Deere Blitz Black Satin paint.

Modifications and new parts are listed below. Any questions, do not hesitate to email.

Thank you for looking

EXTERIOR
John Deere Blitz Black Satin Paint
-still has a few imperfections, not a show quality paint job

Chrome European Bumpers, great condition
-new mounting hardware
-new front turn signal lenses
-German License plate and frame

Pfeba Stone Guards
-very rare 6-piece mudflap type guards

New front and Rear Window Lock Strips in black
New Taillight gaskets
European Grills

INTERIOR

Black Vinyl Sport Interior
-Drivers seat has a 1" tear
-Passenger seat has 2-3 small tears/cracks
-Door panels are 7/10 condition
-New Black upper molding strips (all 4, mounted to the top of the door panels)

Dyed black rear speaker panel
European Speedometer with a Clock in place of Tachometer
316i HVAC panel
Switchless center console
One-piece lighted shift knob/boot
MTECH 1 Steering wheel with new tri-color badge
New non-E30 fitment BMW floormats (fitment is close enough)
Base Alpine CD Player with iPod/phone control
OEM front speakers in kickpanel
Premium Sound Rear Speakers
Already wired in kit for a trunk mounted amplifier, ready to drop in

DRIVETRAIN
-Stock M20, refreshed with all new gaskets and seals, including headgasket, headbolts, etc.
-Refurbished Air Flow meter
-German Engineering Silicone Intake Boot
-Refurbished M50 Injectors on an OEM powdercoated fuel rail
-Euro 323i 14lb Flywheel
-New Clutch, Pressure plate, throwout bearing, pilot bearing, PP bolts
-New Slave Cylinder with Stainless Steel Clutch line
-Trans has new input, output and selector rod seals
-E36 M3 Shifter
-New Guibo, CSB and the driveshaft was a refurbished unit installed in 2012
-3.73 LSD differential has a new cover gasket, fluid and input and output seals
-Black ceramic coated OEM exhaust manifolds
-Stock Downpipe catalytic converter
-New Scorpion Exhaust
-New Oxygen Sensor
-New motor mounts, engine stop rubber and trans mounts
-New timing belt, water pump, thermostat, belt, air filter, fan clutch, hoses
-New Cap and Rotor
-New BMW high performance ignition wire set

SUSPENSION
-H&R Sport Springs
-KYB Shocks
-New front shock mounts, Convertible rear shock mounts, E90 front drophats, control arms, control arm bushings, sway links
-Convertible front sway bar, M3 rear sway bar

WHEELS
-17x7.5 BBS RX
-ET 35
-15mm front and 20mm rear spacers
-Kuhmo Ecsta LE Sport Tires, 215/40 ZR17 with alot of life left

BRAKES
-new rotors
-newer 325e non-abs master cylinder
-new hardlines, from master to each wheel
-Stainless steel brake lines, replaced stock rubber

FUEL
-new in tank and external fuel pumps
-new fuel filter
-new fuel hard lines from tank to engine bay
-new rubber fuel line all around
-tank removed, POR-15'd and painted with new rubber pads installed

MISC
-car has been stripped of all accessories and options; no A/C, no power steering, no ABS, no oil cooler, no power windows
-only option remaining is Cruise Control and the power sunroof

Overall, a well sorted car with loads of maintenance done, sporty ride, nice sounding exhaust and a nice triple black look. Fun car to drive and reliable. Freeway avg was 31 MPG.

I will be leaving Vancouver today, headed down to San Fransisco but will deliver the car anywhere on the west coast.

Many thanks













































$5,300 obo

[BrewCity11]

Leaving Vancouver today, to head down coast to Cali. Valve adjustment and oil change before i leave.

I've put over 4,000 miles since i hit the road on July 4th.

I would be willing to deliver within a days' driving distance of San Fransisco. Please email to discuss.

[BrewCity11]

Few things i've left out that i just realized:

-both the drivers and pass locks were rebuilt, as well as the trunk. Keys work in all three and central locking now functioning 100%

-heater core, rear subframe bushings and blower motor are all less than 2 years old

[BrewCity11]

Forgot to post VIN: WBAAA1305H2325811

[MR 325]

Man I would love to own this car!

[ToPLeSS(e30)FeinD]

great price for such a detailed build. glws. cant imagine the FS lasting long

[M-technik-3]

That's priced to move quickly. GLWS Turk

[llegos]

I'm interested. Any idea if it will pass CA smog? Nothing you listed makes it seem like it shouldn't, just want to double check.

[cabin]

Cool car and a great price, GLWS.

[Joeydub7]

Where'd u get the bumpers if u don't mind me askin text 907 687 2550

[foglght]

If the A/C was installed and working, I would buy this.

[Scsponger31]

Do you have better pictures of the front seats? I am super interested.

[mcr_driver]

Car is still registered as a New Jersey car? Will it have any issue's passing smog, states it has a Cat and stock manifolds but just making sure very interested...

[ZM Blue Devil]

This maybe the lowest priced car to come out of Guten, well built and road tested to show the quality of the build. Sad to see her leave the family. If we can answer any questions dont hesitate to contact us.

[BrewCity11]

Hi all. Thanks for the comments. I believe it's a very fairly priced car.

To answer questions:
-I am currently in Seattle and my end location will be nor cal by weeks end.

-I don't see any reason why it wouldn't pass smog although I don't know how stringent they will be with the visual inspection (no charcoal canister)