Announcement

Collapse
No announcement yet.

FS: '87 Delphin Grey 325is (Turbo, Stroker, Plastic Bumpers and Coilovers)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FS: '87 Delphin Grey 325is (Turbo, Stroker, Plastic Bumpers and Coilovers)

    The time has come to sell my long time project car. I have owned the car for ~8.5 years. I have spent countless hours and dollars building the car from the ground up. The car has been featured at both the E30 Picnic and during the E30 Picnic Tech day. The car in it's current form makes 330hp and 330 lb-ft at the wheels at 10psi and is a total rocket. I will let the pictures and specifications tell the whole story.



















    Videos
    OnRamp:


    Idle/Rev:


    Engine Start:


    Drive By:


    Walk Around:



    Chassis
    1987 Delphin Grey 325is
    5sp Manual Transmission
    206,xxx Miles on Chassis
    <6,000 Miles on Engine and Suspension

    Engine (2.8 Liter Turbocharged M20)

    Block
    85mm 8.5:1 Compression JE Forged Pistons w/ Raised Pin Height for 135mm Rods
    135mm Eagle H Beam Rods w/ ARP Bolts
    ARP Main Studs
    ARP Head Studs
    Cometic MLS Headgasket (0.080in)
    New Rod/Main Bearings
    New Oil Pump
    New Water Pump
    New Timing Belt w/ Tensioner
    ETA Crank
    Oil Pan w/ -10AN oil Return

    Head
    CatCams 273Deg Duration 11.5mm lift Cam
    Welded Coolant Channels
    New IE SS Valves
    New Febi Rockers
    New Rocker Shafts
    New OE BMW Valve Springs
    323 upper Timing Belt Cover (No Distributor)

    Engine Management
    Megasquirt I v3.0 PCB
    E36 TPS w/ Billet AL Adapter Bracket
    GM Coolant and AIT Sensors
    Siemens 60# Injectors
    GM Coil Packs (Waste Fire)
    Innovate LC-1 w/ XD-1 Digital Gauge
    USB Interface Cable

    Turbo System
    Rebuilt Holset HX35 w/ 14cm^2 Non-wastegated housing
    -3AN Oil Feed
    -10AN Oil Return
    Tial 38mm external WG w/ Screemer Pipe
    666 Fabrication Turbo Manifold Adapter (First One Ever Produced)
    Full 3in Exhaust Turbo Back
    Header Wrap on Downpipe
    Borla XR-1 Muffler
    4in K&N Filter
    2.5in AL Intercooler Piping
    22x12x3in Bar and Plate Intercooler
    HKS SSQV BOV
    Manual (Ball and Spring) Boost Controller

    Assorted
    Mobil 1 15W50 Since Rebuild
    Painted Black Intake and Valve Cover
    Aftermarket Oil Cooler Behind Kidneys w/ -10AN SS Braided Lines
    New Fan Clutch
    666 Fabrication Aluminum Coolant Tank
    Crankcase Breather Catch Can
    Bosch "044" Inline Fuel Pump
    IE Polyurethane Motor Mounts
    AC Firewall Forward Removed

    Drivetrain

    Lightened Flywheel (Roughly 3lb)
    Clutchnet 6 Puck Sprung Clutch Plate
    Sachs HD "618" Pressure Plate
    New Slave Cylinder
    New TO Bearing
    New Guibo and Center Support Bearing
    New Transmission Mounts
    S3.73 Diff w/ AKG Polyurethane Bushing
    Low Mileage Replacement Axles
    Z3 1.9 Short Shifter
    Delrin Front Shift Support Bushing
    New Rear Shift Support Bushing

    Suspension

    Front
    1in Shortened Front Strut Housings w/ M3 End Link Tabs
    Short Koni Race SA Front Struts
    Adjustable M3 Style Front Anti-Roll Bar Linkage
    Coilovers w/ 450 lb/in Eibach Springs
    Vorshlag Camber/Caster Plates
    Sparco Front Strut Brace
    New Control Arms
    AKG Polyurethane M3 Offset CABs
    Rebuilt 2.7 Turn LTL Z3 Steering Rack w/ New Tie Rods
    New Power Steering Hoses

    Rear
    Koni Sport Top Adjustable Shocks
    TCKline Rear Shock Mounts
    Coilovers w/ 750 lb/in Eibach Springs
    AKG Polyurethane TA Bushings
    AKG Polyurethane Subframe Bushings
    IE Camber and Toe Adjustment Tabs

    Brakes
    Brembo Solid Rotors
    Pagid Pads
    Braided SS Brake Lines (6 Piece)

    Exterior
    Complete Repaint in Delphin Grey in Aug 2005 w/ Dupont Chromabase
    Plastic Bumper Retrofit
    Late Model Front Valance
    "is" Front Lip
    Ryan G Splitter
    318is Fog Light Deletes
    MHW Smoked Front Turn Signals
    Hella Smoked Euro Ellipsoids
    Euro Grills w/ Black Kidney Grill
    "Shadowline" Trim
    "is" Sideskirts
    M-tech 1 Rear Spoiler
    Startec Tail Lights
    Euro Plate Filler
    M-Tech 2 replica rear lower valance
    New Windshield
    16x8 Rota slipstreams w/ 225/45 R16 Hankook RS2 Tires

    Interior
    Crack Free Dashboard
    Stock Tan Sport Interior
    M-Tech 1 Steering Wheel
    Leather E-brake Boot/Handle and Shift Boot/Knob
    Bavarian Autosport Floor Mats
    2 Gauge A Pillar Mount
    2 Gauge Ash Tray Mount w/ Power Port
    HKS Boost Gauge
    Innovate XD-1 Wideband A/F Gauge
    VDO Vision Oil Temp Gauge
    VDO Vision Oil Pressure Gauge
    Alpine CDA-9827 CD Deck w/ AUX Input Cable in Glovebox
    Stock Premium Sound w/ Inifinity Front Tweeters

    Issues
    Few Small Nicks in the Paint
    Oil Pan Gasket Leaks a Bit
    Head Gasket weeps a little oil on right front corner (Common Issue w/ M20)
    Needs improved Crank Case Vent System (Better Catch Can)
    Output shaft on Transmission Leaks a little (Need to replace Output flange and Seal)
    Needs a Good Underbody Cleaning
    Front Seats need to be Recovered or Replaced (Showing their Age)
    Needs an Idle Control Valve Added

    Also Included with Sale
    Huge Stack of Receipts
    Extra Paint from Repaint
    Black/Grey Door Panels from 318is
    Late Model Parcel Shelf w/ 3rd Brake light and pigtail
    Standard 12cm^2 HX35 Wastegated Turbo Exhaust Housing
    Euro Tail light Backing Plates for Rear fog light
    Megasquirt Bench Tester (MegaStim)
    All Megasquirt software/files for the car
    Any Other Odds and Ends I can Find for the Car


    The car is currently located in Anacortes, WA 98221
    I would like to get 10k OBO

    Please Email stark.isaac (at) gmail dot com
    Last edited by backtrail69; 02-18-2014, 10:07 PM. Reason: New Picture and Videos
    :: PNW Crew ::
    '87 325 4dr, '74 2002

    #2
    paint looks awesome, glws.

    any before/after shots?
    sigpic

    Comment


      #3
      Man I want this car so bad. Always admired this car.
      _________

      Rep Savannah Crew

      Comment


        #4
        This car is a R3V legend. Sorry to see it go. :(
        BimmerHeads
        Classic BMW Specialists
        Santa Clarita, CA

        www.BimmerHeads.com

        Comment


          #5
          This is a steal.
          Estoril E36 M3/4/5 | Toledo E53 X5 3.0 | LeMans E90 335D M-Sport

          Comment


            #6
            Wow can't believe you'd sell this. Someone will be lucky to have this

            Comment


              #7
              I remember when I first started researching e30's back in high school I always wanted to build a car like yours.

              Good luck selling your E30. I'd love to own this one if I could.
              1990 325is Brilliantrot/Natur

              Comment


                #8
                What a lesson in thoroughness and devotion. Your car, sir, is a beauty. Best of luck finding it an appreciative owner!

                Comment


                  #9
                  Originally posted by ethurtee View Post
                  What a lesson in thoroughness and devotion. Your car, sir, is a beauty. Best of luck finding it an appreciative owner!
                  This might be the nicest/bestest response I've ever seen on r3v.

                  GL OP~!

                  Comment


                    #10
                    this car is so beautiful! worth way more than 24v swapped cars imo. glws!


                    E30 M30 B35 Swap Mounts!
                    http://store.garagistic.com/ocart/e3...=5475809a87e04

                    Comment


                      #11
                      Extremely well sorted and well built vehicle. GLWS!

                      Comment


                        #12
                        Bump for added videos of the car.
                        :: PNW Crew ::
                        '87 325 4dr, '74 2002

                        Comment


                          #13
                          Is that a scrape-guard on the very bottom of the valence or what is that?

                          Comment


                            #14
                            Originally posted by anabolice30 View Post
                            Is that a scrape-guard on the very bottom of the valence or what is that?
                            It is a Ryan G "splitter". Mostly it is cosmetic.
                            :: PNW Crew ::
                            '87 325 4dr, '74 2002

                            Comment


                              #15
                              great price for an amazing looking car. great build man and of course a very unneeded GLWS. would have this next to the vert in the blink of an eye if i could.
                              '89 Delphin 2.8 Cabrio
                              '94 Yamaha FZR 600

                              Originally posted by FlexdXJ
                              Is that thing on air?

                              Comment

                              Working...
                              X