Hello all,
Photos: https://www.flickr.com/gp/128916591@N07/Ax28hA
First of all, this car is NOT perfect. The car has a rebuilt title due to a front-end collision in the early 90s.
1988 BMW 528e
Mileage on the chassis is at : 134k
Mileage on refreshed head: 6k
Driveline
- Custom 533 lightweight (13lb) flywheel with 535 ring gear and starter
- Clutchmasters Kevlar 535 clutch
- Tranny mounts
- AutoSolutions SSK, complete kit
- 3.25 Limited Slip differential
- E34 M5 Guibo
- Upgraded Lemforder diff mount, reinforced welds
- Ireland engineering adjustable rear subframe kit
Turbo, downpipe and exhaust
- 666 fabrications single scroll manifold
- custom 3” downpipe and exhaust
- Tial external wastegate
- Bullseye S256 Turbo
- Custom mounted 3” Vibrant intercooler
Engine Management & Fuel Injection
- Megasquirt II
- Full custom wiring harness with milspec wiring and detachable Summit weatherpack connectors
- Custom Taylor plug wires
- 42lb Bosch/Ford fuel injectors
- wasted spark ignition
- 6 chevy Yukon coils (wasted spark)
- Full PLX Sensor system and OLED gauge ($1000 system) o2, oil pressure, oil temp, water temp, boost
- Mann hummel provent catchcan
Head
325i Cylinder head
stock bottom end
full valve job
custom port work – pictures and stats available
bench/flow tested
metric mechanic beehive valve springs
new rockers and shafts
port matched to intake
Stock e30 325i cam
325i Intake manifold
325i Throttle Body with m50 TPS and custom mount
325i FPR
Exterior
- BMW S11, Blue Onyx, (BMW Individual Program custom color, not perfect)
- Hartge front spoiler (Paul Ladue fiberglass reproduction)
- Original Zender rear skirt
- M-Tech rear decklid spoiler
- replaced ALL exterior body trim including M5 fender guards and door mouldings
- “Matts Kinnby” tail-lights with clear turns
- front and rear Euro bumpers (NEW OEM BMW in 2007)
- Euro Headlights and front grill
- Euro front spoiler mounted turn signals (custom clear lenses)
- New OEM front and rear window glass
- all new chrome window trim front and rear as well as doors
- new felt window guides
- Dynamat soundproofing throughout the car
Wheels and hubs
- 17" Apex Semi-Forged wheels 17lbs each
- Bridgestone RE01-R tires (225/45 front 245/40 rear) 60% life
- rolled fenders in rear
- lugnut/stud conversion
Brakes
- Front: e32 750il calipers- front Akebono Euro Ceramic pads and PowerSlot Rotors
- Rear: e34 530i rotors and calipers – rear (brass BAVAuto caliper bushings, metal master pads)
Suspension
- adjustable coilover kit by Ground Control with Koni top adjust front
- Ground control adjustable front camber plates
- Ground control solid rear shock mounts
- Ground control/Eibach 440lb/280lb f/r springs
- custom shortened and weld-reinforced front struts
- Mason Engineering front and rear strut braces
- Meyle HD upper and lower control arms
- Meyle tie rods
- New Rear subframe bushings
- Custom Sway bar setup
- Adjustable sway bar links
INTERIOR
-Reconditioned e30 sport seats with custom OEM BMW leather
- Rear seats with custom OEM BMW leather
-New carpet
-Working AC and HEAT
Recent maintenance:
E28 2015-16 Receipts.
Work Done Date Cost
Oil change 7/18/15 80
Alignment 7/18/15 120
Relocate/Replace Return line. 8/12/15 434.44
Spark Plugs 9/5/15 17.34
Ignition Wires 9/5/15 Had Extra
Open Wastegate Dump 9/25/15 80
Diff fluid flush 9/30/15 34.98
Oil Change 10/20/15 37.35
Replace Radiator 11/28/15 255.28
Wire E-fan/add Temp Sensor 12/17/15 197.28
Replace oil feed line with Vibrant Stainless Steel 12/30/15 30.63
Exhaust manifold gasket 2/15/16 34.01
Valve cover gasket 2/15/16 Had extra
Valve adjustment 2/15/16 N/a
Oil and filter 2/15/16 46.06
New ignition wires 2/15/16 Had extra
Inspect spark plugs 2/15/16 N/a
Heat wrap turbo manifold 2/15/16 41.63
Resurface turbo manifold
Things that need attention:
Interior:
• Headliner does not sag, but above the back right is stained
• Panel underneath the steering wheel is missing; I believe I may have it somewhere in my parts bin, if so I will re install it.
Exterior:
• Paint is not perfect by any means, driver fender above the wheel well is scuffed, and passenger front door has sunspots.
Engine Management
• It could use a new tune, idle needs fine tuning, and it has a LOT of power left in it.
I have hundreds of pictures and receipts of the car and all of the work dating back over a decade. If anyone is seriously interested I can email more information.
I’ll put the price at $8400 OBO
I’m really open to trades as well.
Contact information:
For the quickest response please email me at: kevingharavi@hotmail.com
[img]IMG_0200 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0137 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0641 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0188 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0496 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0180 by Kevin Gharavi, on Flickr[/img]
Photos: https://www.flickr.com/gp/128916591@N07/Ax28hA
First of all, this car is NOT perfect. The car has a rebuilt title due to a front-end collision in the early 90s.
1988 BMW 528e
Mileage on the chassis is at : 134k
Mileage on refreshed head: 6k
Driveline
- Custom 533 lightweight (13lb) flywheel with 535 ring gear and starter
- Clutchmasters Kevlar 535 clutch
- Tranny mounts
- AutoSolutions SSK, complete kit
- 3.25 Limited Slip differential
- E34 M5 Guibo
- Upgraded Lemforder diff mount, reinforced welds
- Ireland engineering adjustable rear subframe kit
Turbo, downpipe and exhaust
- 666 fabrications single scroll manifold
- custom 3” downpipe and exhaust
- Tial external wastegate
- Bullseye S256 Turbo
- Custom mounted 3” Vibrant intercooler
Engine Management & Fuel Injection
- Megasquirt II
- Full custom wiring harness with milspec wiring and detachable Summit weatherpack connectors
- Custom Taylor plug wires
- 42lb Bosch/Ford fuel injectors
- wasted spark ignition
- 6 chevy Yukon coils (wasted spark)
- Full PLX Sensor system and OLED gauge ($1000 system) o2, oil pressure, oil temp, water temp, boost
- Mann hummel provent catchcan
Head
325i Cylinder head
stock bottom end
full valve job
custom port work – pictures and stats available
bench/flow tested
metric mechanic beehive valve springs
new rockers and shafts
port matched to intake
Stock e30 325i cam
325i Intake manifold
325i Throttle Body with m50 TPS and custom mount
325i FPR
Exterior
- BMW S11, Blue Onyx, (BMW Individual Program custom color, not perfect)
- Hartge front spoiler (Paul Ladue fiberglass reproduction)
- Original Zender rear skirt
- M-Tech rear decklid spoiler
- replaced ALL exterior body trim including M5 fender guards and door mouldings
- “Matts Kinnby” tail-lights with clear turns
- front and rear Euro bumpers (NEW OEM BMW in 2007)
- Euro Headlights and front grill
- Euro front spoiler mounted turn signals (custom clear lenses)
- New OEM front and rear window glass
- all new chrome window trim front and rear as well as doors
- new felt window guides
- Dynamat soundproofing throughout the car
Wheels and hubs
- 17" Apex Semi-Forged wheels 17lbs each
- Bridgestone RE01-R tires (225/45 front 245/40 rear) 60% life
- rolled fenders in rear
- lugnut/stud conversion
Brakes
- Front: e32 750il calipers- front Akebono Euro Ceramic pads and PowerSlot Rotors
- Rear: e34 530i rotors and calipers – rear (brass BAVAuto caliper bushings, metal master pads)
Suspension
- adjustable coilover kit by Ground Control with Koni top adjust front
- Ground control adjustable front camber plates
- Ground control solid rear shock mounts
- Ground control/Eibach 440lb/280lb f/r springs
- custom shortened and weld-reinforced front struts
- Mason Engineering front and rear strut braces
- Meyle HD upper and lower control arms
- Meyle tie rods
- New Rear subframe bushings
- Custom Sway bar setup
- Adjustable sway bar links
INTERIOR
-Reconditioned e30 sport seats with custom OEM BMW leather
- Rear seats with custom OEM BMW leather
-New carpet
-Working AC and HEAT
Recent maintenance:
E28 2015-16 Receipts.
Work Done Date Cost
Oil change 7/18/15 80
Alignment 7/18/15 120
Relocate/Replace Return line. 8/12/15 434.44
Spark Plugs 9/5/15 17.34
Ignition Wires 9/5/15 Had Extra
Open Wastegate Dump 9/25/15 80
Diff fluid flush 9/30/15 34.98
Oil Change 10/20/15 37.35
Replace Radiator 11/28/15 255.28
Wire E-fan/add Temp Sensor 12/17/15 197.28
Replace oil feed line with Vibrant Stainless Steel 12/30/15 30.63
Exhaust manifold gasket 2/15/16 34.01
Valve cover gasket 2/15/16 Had extra
Valve adjustment 2/15/16 N/a
Oil and filter 2/15/16 46.06
New ignition wires 2/15/16 Had extra
Inspect spark plugs 2/15/16 N/a
Heat wrap turbo manifold 2/15/16 41.63
Resurface turbo manifold
Things that need attention:
Interior:
• Headliner does not sag, but above the back right is stained
• Panel underneath the steering wheel is missing; I believe I may have it somewhere in my parts bin, if so I will re install it.
Exterior:
• Paint is not perfect by any means, driver fender above the wheel well is scuffed, and passenger front door has sunspots.
Engine Management
• It could use a new tune, idle needs fine tuning, and it has a LOT of power left in it.
I have hundreds of pictures and receipts of the car and all of the work dating back over a decade. If anyone is seriously interested I can email more information.
I’ll put the price at $8400 OBO
I’m really open to trades as well.
Contact information:
For the quickest response please email me at: kevingharavi@hotmail.com
[img]IMG_0200 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0137 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0641 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0188 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0496 by Kevin Gharavi, on Flickr[/img]
[img]IMG_0180 by Kevin Gharavi, on Flickr[/img]
Comment