Fs: Alpina steering wheel

[e30rida]

Very Nice Alpina Steering wheel. Fresh newly redone in original Nappa black leather with blue and green stitching. Vintage Original not repop. Dated 6-91. $498 Shipped.

[e30rida]

If the MOMO hub adapter is needed I can add it for an extra $75

[Bmwentertains]

Is this feasible on a 91' vert with airbag,?

Sent from my SM-N970U using Tapatalk

[e30rida]

Yes, You will need the MOMO adapter off course if you don't have one.

[e30rida]

By adapter I mean this:

https://store.vacmotorsports.com/momo-steering-wheel-hub-adapter-kit-bmw-e30-p1139.aspx

[flipper325es]

Is this feasible on a 91' vert with airbag,?

It's entirely feasible, you'll need to use a spacer, BMW p/n 32311120260, in addition to a hub adapter.

If you decide to buy this wheel and need a Momo adapter, I have an extra one, it's brand new.

[e30rida]

ttt

[kronus]

how were the horn button imprints done?

[e30rida]

how were the horn button imprints done?

With 300 Euros worth of work. But really have no idea. They do look exactly like they were originally. Been using the same guy for several years but you need to send it to Germany, about 60 days back and forth.

[Bmwentertains]

It's entirely feasible, you'll need to use a spacer, BMW p/n 32311120260, in addition to a hub adapter.

If you decide to buy this wheel and need a Momo adapter, I have an extra one, it's brand new.

Ok, an mtech 1 or 2 is supposed to sit closer to the dash needing new stalks (only read this, no first hand experience) is this the same case with this wheel? Does this sit closer to the driver or further?

Sent from my SM-N970U using Tapatalk

[flipper325es]

Ok, an mtech 1 or 2 is supposed to sit closer to the dash needing new stalks (only read this, no first hand experience) is this the same case with this wheel? Does this sit closer to the driver or further?

Momo hub is just under 3.5" tall. This is a flat wheel so the combo would be just over 3.5" tall to the center plane of the wheel. It would likely match the height of factory non-airbag wheels. If you have an airbag wheel, and would want this one to match the position, it's very easy with a spacer between the hub and the wheel -- they're available in different thicknesses.

This is one of the advantages of aftermarket wheels -- you can easily move them closer to the driver, by either using a dished wheel, or a flat wheel with a spacer of 0.5-3". Not easy to do with factory wheels with an integral hub.

[e30rida]

For those who've asked here are more pics.

[Digitalwave]

how were the horn button imprints done?

Guessing with a heated embossing die.

Great looking wheel!

[e30rida]

Still for sale

[e30rida]

bumpz