318iC parting out

[ChaseN]

Hey guys

I've been parting my '91 318 cab off and on for a while - I live in Pittsburgh and the car is in VA, so its a bit of a pain. Anyways, I'm in VA right now and thought I'd see if there's anything anybody wants me to pull off in particular. The car is maritausblau over a nice black sport interior (some of the best condition original vinyl sport seats I've seen). Just let me know what you need and I'll pull it off - most of the car is still available. Also, if anyone needs any oversized, hard to ship items (hood, fender, dash, etc.) And lives between northern VA and pittsburgh I can possibly meet youin person tomorrow evening. My route is I-81 to Rt. 522N (thru berkley springs, wv) and then I-70W to the PA turnpike. I can modify my route slightly as well if you aren't too far out of the way.

I also have a set of dirty M3 basketweaves I could FTF someone with.


Thanks!

Chase

[metalsoul]

Do you have the little black plastic flap and spring that covers convertible top arm on the passenger side?

If my description doesn't sound familiar let me know.
Thanks

[ChaseN]

Not 100% sure what you're talking about...I'll try to take a ppic and post it to see if I'm right.

Anyways, bump for the daytime guys. All PMs replied so far.

[ChaseN]

Tell me what you need...only a couple hours left to spend with the car. Stuff available:

Nice black vinyl sport seats
Good condition black vinyl rear seats (bottom portion and seat back)
Console (forward portion, not the e-brake console)
Good condition chrome basketweave centercaps
Dashboard (one tiny crack and one slight buckle in a hard to see area when installed)
Body panels (trunk, hood, fenders etc.)
All M42 engine parts (afm, airbox, distributor, alternator, ps pump, ac compressor, etc...literally everything is still there and I'll sell what you need seperate)
M42 DME (good 88 pin connector donor for standalone or what have you)
Plastic bumpers and valances
Good condition M42 radiator (come on swap guys :D)
Plastic bumpers/ valances
Grills, kidneys
Trunk shocks
Matched lock set
ABS unit and computer
Good Airbag computer
Window motors
Side mirrors
AC parts
Lots of different wiring harnesses, OE BMW plugs, etc.
Good condition black vinyl door cards w/ crack free arm rests/map pockets
GC fusebox cover
Multiple sensors, etc.
And more!

[fiftytakedowns]

Do you have the passenger inner fender plastic Wheel well that connects to the Brake duct, including the duct?

and a Front liscence plate bracket?

[McGyver]

pics on the caps, maybe a weave or 2, and im interested in the lockset.

[cablehaze15]

wish you were closer i need bumpers :(

[stevetrocs]

How much for both fenders? I'm outside Virginia beach until tomorrow. Need a couple of other parts also.

[ChaseN]

pics on the caps, maybe a weave or 2, and im interested in the lockset.

How much for both fenders? I'm outside Virginia beach until tomorrow. Need a couple of other parts also.

Both PM'd

[e30lov]

manual top?

Im looking for the entire convertible manual latch conversion kit to lock my lid cover

I need the rear drivers side interior panel with the little door handle thing, all the release cables and the two latches for the lid cover with all hardware.

[ChaseN]

Well that's it for pullimg stuff off this week. Thanks to everyone who bought something.

Feel free to still PM me, I might have what you need with me, and if not I'm keeping a list of who wants what for when I go back down (prob next thurs/fri). Couple things:

1. Just like it says in my posts, I live 4.5 hours from the car. I only get to pull stuff off it 1-2 days a week so bare with me if I can't get your parts immediately.

2. Just to answr the 27 PMs at once: no, I don't have tonneau cover shocks. Mine are blown, just like yours. And apparenly everyone else's :D

Once again, if you bought stuff, thanks! If not, my 4 door iX is literally LOADED with stuff ( I even have parts strapped to the roof rack :D) so I might have what you need. If not, I can get it next week.

Thanks!

Chase

manual top?

Im looking for the entire convertible manual latch conversion kit to lock my lid cover

I need the rear drivers side interior panel with the little door handle thing, all the release cables and the two latches for the lid cover with all hardware.

PM'd

[metalsoul]

Heres a pic of it missing, I need the flap and the tiny spring for it (passenger side):

[ChaseN]

Gotcha. Mine is missing also :(

There's a thief running around stealing those from everyone.

[Ceeker]

Gotcha. Mine is missing also :(

There's a thief running around stealing those from everyone.

funny I just pulled a working set off my parts car and the guy is coming tomorrow for it. Wait till he finds out what I'm asking for it..lol. I hear the parts don't sell cheap..what is it that my friend told me??? when the top goes down the price goes up?? lol..

[Titan 3]

I need the blank check panel out of your car, if it's in great shape... Also, what's yout price on the console, and what kind of shape is it in?

Thanks!

Mike