Custom Hub Centric Adapters and Spacers

[Aleg]

pm sent

[Overlord475]

4x100 to 5x120 adapters right meow!!! ha...

How are they coming?

[weaksauce]

any progress on 4x100 to 5x120?

it's only been a month or so........

[Highway1]

I'm interested in some spacers similar to the ones bellow except i would want 4x100 to 4x100 and 20mm. could i just use my original wheel bolts to bolt the spacer on or is the stud conversion necessary?

Thanks

[mkcman17]

how about a pair of 17mm hubcentric spacers with lugs?

[e30trooper]

I'm interested in some spacers similar to the ones bellow except i would want 4x100 to 4x100 and 20mm. could i just use my original wheel bolts to bolt the spacer on or is the stud conversion necessary?

Thanks

thats not spacers, those are adapters 4x100 to 4x108 17mm on my car. You can get 20mm spacers and just do a stud conversion.

[mkcman17]

? I'm asking about spacers. I want smaller than 20 but bigger than 15

[Highway1]

thats not spacers, those are adapters 4x100 to 4x108 17mm on my car. You can get 20mm spacers and just do a stud conversion.

I prefer spacers that bolt on like your adapters. i was wondering if 20mm would be thick enough to use oem bolts.

[e30trooper]

? I'm asking about spacers. I want smaller than 20 but bigger than 15

17mm lol ? Ill get you a quote tomorrow. What hub centric stock e30?

I prefer spacers that bolt on like your adapters. i was wondering if 20mm would be thick enough to use oem bolts.

Ill txt him tomorrow. Ill see about 20mm spacers with extended stud conversion.

[mkcman17]

no, bigger than stock e30, but scratch it, i need to use my money towards fixing my ghetto ebay header jokes.

[e30trooper]

no, bigger than stock e30, but scratch it, i need to use my money towards fixing my ghetto ebay header jokes.

lol ebay headers. well let me know dude. Anything can be made with just a call.

[bwawuz02]

Can you do 3mm spacers 4x100 with a hubcentric adapter built in? 73mm OD 57.1mm ID

And if you could not hollow out the centerbore, I want to use it as a backing to adhere the sticky roundels to.

Simple right? Lol

[handysmurf59]

Hey guys,

How are you bolting on these stud conversions? What torque are you using for the stud's internal hex fitting? Locktite blue on the hub to stud threads?

Thanks,
Jason

[handysmurf59]

nobody wants to offer up some advice?

[straight6pwr]

Can you do 3mm spacers 4x100 with a hubcentric adapter built in? 73mm OD 57.1mm ID

And if you could not hollow out the centerbore, I want to use it as a backing to adhere the sticky roundels to.

Simple right? Lol

impossible. think about it.