FS: M20 Megasquirt and others

[Fernflex]

• Rear Calipers, discs, hawk hp+ pads $75
• IE Fuel pressure regulator $110.00 used for 25 miles
• IE Cam Gear $65.00 used for 25 miles
• Oem Rocker arms $8.00 (I have 11)
• Stock Cam Gear
• Stock 173 Ecu
• 6 injectors green top
• Intake boot
• 6 injectors pink top PENDING SALE
• E30 Fuel Accumulator
• Akg Diff bushing
• 325i Oem Cam
  

[Vivek]

Control arm condition? Includes bushings/lollis? Rear disk (blank?) and pad condition?

[Fernflex]

Control arm condition? Includes bushings/lollis? Rear disk (blank?) and pad condition?

Control arms excellent good conditions, no Lollis, rear disk blank and pad conditions almost new.

[Fernflex]

BUMP (need money to install S52)

Trades are welcome!!!


E30 M3 cluster
E34 Oil pan, oil pick up and dip stick
E28 M5 motor mounts
E21 transmission mounts
Late expansion tank
S52 Euro or S54 oil filter housing.

[OldSkoolE3]

Pics of itbs

[mcr_driver]

Curious on ITB's

[DTMbimmer07]

which megasquirt is it exactly?

[Cinnabar325is]

More info on the big bore throttle body: Is it a modified OEM unit? Who did the work? How much larger? Any pics?

[Luis325]

PIcs of the ITBS!

[Fernflex]

which megasquirt is it exactly?

MS2 from bluapplesoda with everything you need install it, completely PNP no need to cut any harness, Iat sensor, Map sensor, Tps Sensor, Wasted spark, spark plugs wires included.

Perfect for boost (O2 sensor not included and highly recommended) or N/A application to remove that restrictive AMF.

Pics of itbs

They are a home made unit, working perfectly without any problem. They are form GSXr 600 I think they are 40mm.

Not the best pics but you have an idea

More info on the big bore throttle body: Is it a modified OEM unit? Who did the work? How much larger? Any pics?

Im not sure about the brand but it is considerably larger, It could be west coast riots or any other butI know is the oem unit bigger flapper and bored.

[DTMbimmer07]

how long did you run the megasquirt for?

[Fernflex]

Luis, Thanks for the picture.

The MS was installed like 6 month ago and I have only used my car like 4 times.

[Pootis]

Damn that megasquirt is tempting

[VAE30FTW]

Does the megasquirt come with instructions and diagrams? Will it fit all M20's?

[Fernflex]

Does the megasquirt come with instructions and diagrams? Will it fit all M20's?

No need for diagrams because you don't have to cut anything and the only things you need to know can be explained by pm, MS has a lot of information over the internet.

It will fit any type of M20

To install.
1.Removes stock ecu and replace with the MS use the same oem 88 pin connector.
2.Connect vacuum line to the T.
3.Install the Iat sensor to the intake connect the cables to the oem harness and throw away the AFM
4. Remove the throttle body and replace the tps with the new one.
5. Place the wasted spark anywhere you wan't, remove you stock coil, wires, rotor and cap.
6. Eliminate de ICV.

You can text me, send me a message or contact blueapplesoda.

The car should start with the tune it has but I highly recommend you do a new tune for your needs.

No particular order ;)