FS: Complete Custom M20 Turbo Setup (Lots of Pics)

[RobertK]

Selling these parts for a local friend who recently went with a S50 24v swap.

These are not my parts and I'm not a turbo guy so if you have questions please PM me and I will direct them to my friend.

UPDATE: Everything except the MS1 V3 DME has sold.

Will post additional information as it comes to me.

Setup Includes:

- Engloid M20 Manifold Adapter (3/8 Laser Cut Flanges / 304 stainless piping with integrated wastegate flange for Tial external wastegate)
- Turbonetics T3/T4 Turbo Stage II .63AR (5 bolt to 3" vband adapter / rebuilt and balanced 5k ago due to compressor seal leak)
- Tial 40mm External Wastegate (comes with multiple springs / was run with 8psi spring)
- 304 Stainless 3" downpipe with 3"vband flanges with ex wastegate connection vband as well
- Porsche 951 intercooler modified with 2.5" inlet and outlet supports above 450hp, keeps IAT temps below ambient vacuum log.
- MSD Blaster Coil
- Ford Motorsport 24lb Fuel Injectors
- AN -3 Turbo oil feed line with oil sending unit adaptor
- Oil pan with AN -10 return line, tig welded AN -10 male fitting into oil pan
- PFtuning PnP megasquirt MS1-3.0 DME with knock control, launch control, wideband support, used 19lb ford motorsport injectors

[italia8287]

do you know what numbers he was putting down?

[Vivek]

Interested in above question. Is it basically complete other than exhaust and injectors?

[TC|Photography]

will you sell the down pipe separately?

[RobertK]

Updated the price per the seller and added additional info about the turbo.

Interested in above question. Is it basically complete other than exhaust and injectors?

He said that injectors do come with it (24lb blue tops) and it has everything you need for the exhaust except the muffler which he kept.

will you sell the down pipe separately?

Not sure he's interested in splitting it up at this point.

[RobertK]

Up

[Karlm30]

Willing to split it now? Will probably take intercooler, turbo and megasquirt

[Bullet Ride]

do you know what numbers he was putting down?

Interested in above question. Is it basically complete other than exhaust and injectors?

Just an FYI, 24lb injectors are only going to be good for roughly 7-8psi boost, I can't picture this set-up putting down much more than 220whp with those injectors. You'll definitely want to upgrade to something like 42lb injectors if you're going to be buying this set-up.

[RobertK]

Willing to split it now? Will probably take intercooler, turbo and megasquirt

He's still not interested in splitting it up because the v-band stuff will be harder to sell outside it being a complete kit.

Just an FYI, 24lb injectors are only going to be good for roughly 7-8psi boost, I can't picture this set-up putting down much more than 220whp with those injectors. You'll definitely want to upgrade to something like 42lb injectors if you're going to be buying this set-up.

IIRC he did say that he was just running it around 8psi.

[RobertK]

Turbo setup is sold.

MS1 v3 DME is still available.Built by PF Tuning with all the possible goodies - $650 OBO