FS: Many M/S50 engine parts AND complete 318is drivetrain

[Brew]

I can take pictures of any of these parts per your requests.

All prices are Negotiable.

-(6) 21.5# injectors from M/S52 good condition ~60k miles $80 shipped

-S50 head, complete except for camshafts and vanos. Needs to be resurfaced.$500 OBO

-S50 wiring harness $200

-COMPLETE 318is drivetrain. Engine, harness, dme, tranny, and driveshaft. The engine was not running when it was removed from the car, but it did turn over. Transmission worked fine according to the previous owner. Would be good for parts or for a possible engine rebuild. I'll also consider parting it out if there is interest. Almost new alternator and starter that I may sell separately for BO. Complete- $800 picked-up in Marshfield, MA

I also have quite a few miscellaneous M/S50, M42, and M20 parts lying around, so if you need something I don't have listed let me know.


Shipping is not included in any of the pricing, buyer will pay actual shipping costs. I will not ship the S50 block, the m42 or the transmission.


Thanks for looking.

[Low Level E30]

Brew - PM'ed you.

Thanks,

[FredK]

Brew, I'm very interested in the block, crank, rods, and pistons. I can pick up when I check it out, if necessary. Was this the short block you picked up from BPG? I might be interested in the harness as well.

Also, is the head the same head that floated a valve, or is it a different one?

Are you gonna just drop in a complete engine, or have your plans changed yet again?! :)

Can I take a look at the parts this weekend?

Thanks,
Fred

[Brew]

Brew, I'm very interested in the block, crank, rods, and pistons. I can pick up when I check it out, if necessary. Was this the short block you picked up from BPG? I might be interested in the harness as well.

Also, is the head the same head that floated a valve, or is it a different one?

Are you gonna just drop in a complete engine, or have your plans changed yet again?! :)

Can I take a look at the parts this weekend?

Thanks,
Fred

Yeah, got the bottom end from BPG.

The head doesn't have any bent valves, but it would need to have a fair amount of material machined off the headgasket surface. You may be better off to use the internals in a better condition head casting.

Picked up a complete S50 on Friday.

I'll be in Marshfield on Sunday if you want to look at any of the parts. Shoot me a PM.

[Brew]

ttt

[erik325i]

-E36 ZF-trans JB racing lightweight aluminum flywheel, 11lbs - $250

I also have quite a few miscellaneous M/S50, M42, and M20 parts lying around, so if you need something I don't have listed let me know.

Is that the ZF tranny with the flywheel, or is that only the flywheel? I am interested if it is the ZF tranny.

Also, do you have a fuel rail, crank pullies, plastic s50 valve cover/engine cover, or 3.5" HFM?

Thanks.

-Erik

[Brew]

Is that the ZF tranny with the flywheel, or is that only the flywheel? I am interested if it is the ZF tranny.

Also, do you have a fuel rail, crank pullies, plastic s50 valve cover/engine cover, or 3.5" HFM?

Thanks.

-Erik

Sorry, no ZF tranny. The flywheel is for e36 cars with the ZF transmission.

Don't have any of that stuff except for maybe a fuel rail. I'll see what I can dig up for you.

[BMWguy]

Is $800 for the M42, tranny, AND the S50 parts...

what would you take for all the S50 parts in a bundle???

you have PM...

[Brew]

PM's replied.

$800 would be for all of the 318is parts.

[new guy]

Flywheel???

Still have flywheel? condition/ mileage? Thanks Kevin

[Low Level E30]

Still have flywheel? condition/ mileage? Thanks Kevin

Sorry, flywheel is going to me.

[new guy]

Sounds like a fair price..

Sorry, flywheel is going to me.

I hope you enjoy... Didn't mean to step out of line... didn't look spoken for.

[Low Level E30]

I hope you enjoy... Didn't mean to step out of line... didn't look spoken for.

No sweat - just wanted to let you know.

[Brew]

Hehe, thanks for the bump guys.

[nando]

would you sell the S50 rods seperately?