1988 325ix coupe part out

[nando]

I need to get the ball rolling on this so I can buy parts for my 5 speed
swap.

here's a list of parts and prices:

http://www.325ix.com/pics/partscar/Parts.htm

Basically everything is available, except for parts relating to the engine
and transmission/drivetrain (which I am using to rebuild my car). if
something is not listed or you want to make an offer, send me a PM.

I can get pictures of everything, right now the car is basically whole
though and I haven't removed anything but the front suspension.

pictures of the car as it is now are here:

http://www.325ix.com/pics/partscar/

As you can see the body is pretty much toast so if you want a fender or
something you won't find one here (I live in the PNW and have never seen a
car with this much rust!). I'm selling the hood and valance locally to a friend.

thanks

chris

[SchnellerVert]

Good luck Nando, your car really needs a stick to make it complete. TJ was rode hard for years over his not getting done so now you need to finish.

[DarkWing6]

Windshield?

[nando]

it's pitted, if it were in better shape I would have taken it for my car anyway (mine is horribly pitted and chipped).

[KrisHolloway]

What type of ellipsoid's?

[cheades]

Nando, those rims are hot I hope you put them on your car.....

Do you have any of the plastic brake ducts from the car? Also, how does the drivers side rear footwell look, I need a 1'x1' square?

[nando]

haha, I thought about mounting them to see what they looked like, but the spacers are such a PITA I'd rather not.

yeah I have the brake ducts- $15? not sure about the floorpan, that's where the water is, but I'll cut up the carpet and check it for you. fifedog said he never had water in the car before, and it also sat for about 4 months in the rain so there's hope.

[tanksta]

the fogs available? they seem to be in bad shape, but i have the passenger side one busted and would like to replace it atleast.

[nando]

yes, but I was thinking of putting new lenses on them and selling them later. I'm not sure if the passenger side is cracked or not, but the bulb wasn't working when I tested them.

[cheades]

Let me know when you look to see if there is rust, if not I will come up and get the brake duct and cut out that piece.

[nando]

yeah, the car is out in birch bay, don't you work out there? it's on the kickerville road, a stone's throw from the refinery.

[ltflint]

Interested in glove box. Pics if you can get them. Are all three connecting points at the hinge in tact?

Thanks,

Greg

[cheades]

I work out there but I usually am always in the vanpool so I don't have a way to get around after work. If the piece is good though I will have to see about driving one day. PM me when you get a chance to look at it.

[nando]

Interested in glove box. Pics if you can get them. Are all three connecting points at the hinge in tact?

Thanks,

Greg

AFAIK, it's all in working order. I'll add you to the list of parts to check on, I'll be out there maybe tomorrow and definitely friday.

[ltflint]

AFAIK, it's all in working order. I'll add you to the list of parts to check on, I'll be out there maybe tomorrow and definitely friday.

Nando,

Thanks anyway, I picked one up on e30tech.

Good luck with the sales.