E30 coupe redone interior.. distresed leather

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • haggardfab
    Wrencher
    • Sep 2011
    • 283

    #1

    E30 coupe redone interior.. distresed leather

    -- may entertain trades for parts, multi-piece wheels, maybe even another e30? who knows--


    I had an interior done for a coupe Im building but have since put together a vert since the dude had the interior for almost a year, im losing interest in finishing the coupe to the level I had originally planned so im debating parting with my interior since its just been sitting in a spare bedroom at my grandmothers for a few months..

    the seats are done in "distressed" high quality faux leather by a very reputable interior guy down south.. all the foam in the seats are good (front and rear) and basically everything is good to go..

    the seats will most likely need a few new handles and I believe one cable in the passenger seat will need to be replaces, or just fixed better but other then that the sport seats are 100% functional

    none of the holes were cut into the front door panels since I was planning to ditch the factory arm rests and do something cleaner looking

    im into this about $2000 and im just trying to get my money back, please don't bother trying to low-ball me, at this point it doesn't cost me anything to just let it sit until I come across something else to put it in

    im located in Vineland NJ, im willing to drive a little to meet up (with a small deposit) but at this time im not willing to risk shipping it


    best way to contact me is text or email.. 609-five zero one-2479 Matt@haggardfab.com

    ----Any markings you see on the seats/panels are just his stencils he used when making them, they will wipe rite off, they have never been installed or even sat on since getting them back----

    the last pic they look brown for some reason but they are more red like the rest of the pics











    Last edited by haggardfab; 05-29-2014, 12:39 PM.
    IG: haggardfab
  • haggardfab
    Wrencher
    • Sep 2011
    • 283

    #2
    will do PARTIAL trade for very nice stock pieces.. sport or comfort
    IG: haggardfab

    Comment

    • poopin04
      E30 Fanatic
      • Jul 2010
      • 1396

      #3
      And I thought I was the only dude that had this design for my seats in mind. GLWS dude, if I had the monies I'd be all over this.
      Click here to leave me feedback on our transactions. :p

      Comment

      • jhaurimn
        R3VLimited
        • Nov 2012
        • 2224

        #4
        Those are cool, would look great in the right car. Glws
        Current:
        1989 325i
        1988 M3
        1987 325ic
        Past:
        2001 330ci
        2001 M3

        Comment

        • haggardfab
          Wrencher
          • Sep 2011
          • 283

          #5
          bumppp
          IG: haggardfab

          Comment

          • MC Hammered
            R3VLimited
            • Jul 2008
            • 2076

            #6
            Nice interior! And thanks for the pics of the doorcards and I planned to do that to match my interior as well.

            GLWS!


            My 1989 e30 s52 Touring... this is Betty

            My 1989 325i vert (sold)...this is Nina

            My 1991 M5 (sold)... this is Veronica

            Photo comparison: OEM vs aftermarket windscreen for a convertible

            Comment

            • navid41691
              Mod Crazy
              • Apr 2011
              • 677

              #7
              so nice. How do you pull your doors closed?

              Comment

              • LoneWolf
                E30 Addict
                • Jan 2012
                • 402

                #8
                Originally posted by navid41691
                so nice. How do you pull your doors closed?
                Looks like you can either cut the stock holes and ruin it with the stock armrest or do what he was planning. Make something better

                Comment

                • MC Hammered
                  R3VLimited
                  • Jul 2008
                  • 2076

                  #9
                  Originally posted by navid41691
                  so nice. How do you pull your doors closed?
                  Closing the door is easy, how to open them from the inside is the question!


                  My 1989 e30 s52 Touring... this is Betty

                  My 1989 325i vert (sold)...this is Nina

                  My 1991 M5 (sold)... this is Veronica

                  Photo comparison: OEM vs aftermarket windscreen for a convertible

                  Comment

                  • haggardfab
                    Wrencher
                    • Sep 2011
                    • 283

                    #10
                    Originally posted by navid41691
                    so nice. How do you pull your doors closed?
                    I wasn't planning to use the stock arm rests, all the factory holes are in the panel I just didn't wanna cut anything till I was sure what my final plan was
                    IG: haggardfab

                    Comment

                    • roguetoaster
                      R3V OG
                      • Jan 2012
                      • 7749

                      #11
                      Originally posted by MC Hammered
                      Closing the door is easy, how to open them from the inside is the question!
                      Roll down the window and open the door from the outside handle. Well worth it for a really nice looking interior!

                      Comment

                      • bradnic
                        No R3VLimiter
                        • Jul 2012
                        • 3550

                        #12
                        Looks great and if you've done any homework at all you'll know it's a very reasonable price. GLWS
                        I BUY/SELL REFURBISHED CM5907s & CM5908s

                        HOWTOs:
                        DB vert plastic bumpers
                        OEM Keys
                        MTech1 docs

                        88 ix Lach/Card
                        91 ic Calypso 3.1
                        86 Cosmo 2.7

                        OEM+ or bust!


                        reelizmpro: I will always be an e30 guy.. I still do all of my own labor
                        TrentW: There's just something so right about a well-built M20 in an E30
                        e30m3s54turbo: I save my money for tuner parts.

                        Comment

                        • TheTacoMan
                          R3VLimited
                          • Nov 2011
                          • 2308

                          #13
                          SO awesome, would love this.

                          GLWS

                          Comment

                          • WBizarre
                            Noobie
                            • Apr 2014
                            • 14

                            #14
                            Beautiful interior, GLWS! Would you mind telling us where you got the upholstery work done?

                            Comment

                            • haggardfab
                              Wrencher
                              • Sep 2011
                              • 283

                              #15
                              Originally posted by WBizarre
                              Beautiful interior, GLWS! Would you mind telling us where you got the upholstery work done?
                              Loves Trim shop in georgia
                              IG: haggardfab

                              Comment

                              Working...