FS: Cheap OEM E28 MTech spoiler

[K20RI_211]

sold

[YosemiteSam]

That's an E28 M-tech spoiler, not an E30 M-tech I.

[K20RI_211]

That's an E28 M-tech spoiler, not an E30 M-tech I.

Right you are. Thread title corrected. Thanks!

[K20RI_211]

Up

[K20RI_211]

Bump

[scobaru]

what does this spoiler look like on an E30?

[K20RI_211]

what does this spoiler look like on an E30?

[K20RI_211]

bump

[flyboyx]

not to be nitpickey, but that is actually a 535is spoiler. i guess e28 mtech is close enough. also, another small point: the photo you posted is e30 mtech 1. this spoiler you are selling will hang out about .75" past the edge of the deck lid on each side. also the bolt holes won't line up with standard e30 is holes and the lower edge of this one doesn't fit tightly since e28's use a different profile.

looks like the missing bolts are on the hard plastic part? tape wont cut it but you might be able to epoxy a little bolt back into the plasitic to hold it down.

with that said, this will look awesome on an e30 with some fittment work and restoration. good luck with your sale.

[Steve Corbett]

That's an E28 M-tech spoiler, not an E30 M-tech I.

I understand the E28 is wider, but how could you tell an E30 from an E28 spoiler from these pictures?

[flyboyx]

your question is answered in the post above yours.

[K20RI_211]

not to be nitpickey, but that is actually a 535is spoiler. i guess e28 mtech is close enough. also, another small point: the photo you posted is e30 mtech 1. this spoiler you are selling will hang out about .75" past the edge of the deck lid on each side. also the bolt holes won't line up with standard e30 is holes and the lower edge of this one doesn't fit tightly since e28's use a different profile.

looks like the missing bolts are on the hard plastic part? tape wont cut it but you might be able to epoxy a little bolt back into the plasitic to hold it down.

with that said, this will look awesome on an e30 with some fittment work and restoration. good luck with your sale.

I know it is a 535is spoiler. I own a 535is, so I'm familiar with them. The picture is just for reference.

Frankly, I thought it was common knowledge that the E28 spoiler will work with modification. And I have used double sided tape on them just fine in the past, so your experiences may have been different.

All that said, this will the third one I have sold on here so I'm not sure why there's suddenly confusion over the spoilers and the minor fiddling necessary to make it work on an E30. It's well documented.

In summary: It's a spoiler off of an E28 535is. You will need to drill holes in your trunk if you want it factory correct. However, I have also removed them from junked cars where the owner literally glued AND double-sided taped it on to a non-spoiler car. Depends how ghetto you want to be.

Thanks,

Jeff

[K20RI_211]

bump

[YosemiteSam]

not to be nitpickey, but that is actually a 535is spoiler. i guess e28 mtech is close enough.

Oh, good to know, I always thought the is one was a smaller profile.

I understand the E28 is wider, but how could you tell an E30 from an E28 spoiler from these pictures?

I could tell from those pictures by the ridges on the trailing edge. The E30 M-tech I is smooth on the trailing edge.

[K20RI_211]

bump