I recently acquired this E30 M3 5-lug setup that I will not be able to install unfortunately due to time and money. The setup comes with the following:
-Front struts with hubs
-Tie Rod Level (Still searching one side at the moment, but new ones are around $125)
-Rear adjustable Dinan subframe (Most likely needs new hardware)
-Rear trailing arms with hubs
-Rear half shafts
-Front and rear brake calipers
-E-brake with cable and assembly
-Front shocks but not sure of condition or brand (No springs)
-5-Lug 75mm black bullet nose stud kit from Motorsport Hardware
I also have black Style 32's 17x8/9 et 20/26 that I just purchased that I will sell at an additional cost. PM me if interested. If these don't sell with the kit, I will be setting up an additional FS thread in the wheels and tires section. Original for sale thread was here: http://www.r3vlimited.com/board/showthread.php?t=357612
There aren't any rotors and I wouldn't recommend using the brake pads that are currently in the calipers since one set is missing.
Everything has been sitting for quite some time so I would recommend rebuilding the brake calipers and half shafts and replacing the bushings. You may also need to purchase some of the small nuts and bolts. The bearings do spin freely, but this is another "while you have it out of the car" item. Anyways, onto some pictures.
Front Struts:
Rear Assembly:
Brake Calipers:
Half Shafts and Miscellaneous:
I have been researching and this is an extremely hard setup to find. I see that 95-100% complete setups usually go from $2,500 to $2,800. I would say this one is about 75% complete.
The price is Sold in the Bay Area (near San Jose). I can meet up anywhere within reason. I can ship, but at the expense of the buyer. It would be tough to palletize all of these items, but I can try my best. PM me for details and thanks for looking.
-Ian
-Front struts with hubs
-Tie Rod Level (Still searching one side at the moment, but new ones are around $125)
-Rear adjustable Dinan subframe (Most likely needs new hardware)
-Rear trailing arms with hubs
-Rear half shafts
-Front and rear brake calipers
-E-brake with cable and assembly
-Front shocks but not sure of condition or brand (No springs)
-5-Lug 75mm black bullet nose stud kit from Motorsport Hardware
I also have black Style 32's 17x8/9 et 20/26 that I just purchased that I will sell at an additional cost. PM me if interested. If these don't sell with the kit, I will be setting up an additional FS thread in the wheels and tires section. Original for sale thread was here: http://www.r3vlimited.com/board/showthread.php?t=357612
There aren't any rotors and I wouldn't recommend using the brake pads that are currently in the calipers since one set is missing.
Everything has been sitting for quite some time so I would recommend rebuilding the brake calipers and half shafts and replacing the bushings. You may also need to purchase some of the small nuts and bolts. The bearings do spin freely, but this is another "while you have it out of the car" item. Anyways, onto some pictures.
Front Struts:
Rear Assembly:
Brake Calipers:
Half Shafts and Miscellaneous:
I have been researching and this is an extremely hard setup to find. I see that 95-100% complete setups usually go from $2,500 to $2,800. I would say this one is about 75% complete.
The price is Sold in the Bay Area (near San Jose). I can meet up anywhere within reason. I can ship, but at the expense of the buyer. It would be tough to palletize all of these items, but I can try my best. PM me for details and thanks for looking.
-Ian
Comment