Custom DSSR's - Version 3!! Stainless Steel - $60 shipped!!

[jpod999]

If yours is already in jpod999 i'll happily take your measurements

Unfortunately no, still need to do my first test fit!

[WYZEUP]

if i get the gearbox in this weekend i will have a measurement. but im still waiting on the correct engine mounts for my motor mounts

[badwella]

New DSSR's going out! Hope everyone has a great weekend!

[Rainydays]

Maybe a stupid question, but is the shift joint a wear item? Meaning if I have a late model, should I still buy another late model joint?

[badwella]

Maybe a stupid question, but is the shift joint a wear item? Meaning if I have a late model, should I still buy another late model joint?

Not a stupid question.

The bushing inside the shift joint will oval out over time when used with the oem shift linkage.

The DSSR's 'pinch' the face of the joint.

So, the twisting side to side motion will be eliminated. However, the forward and back motion on the shift joint could be an issue. It'll be minimal at best, IMO.

If you're worried, you can buy a new one and return it if it isn't needed. If you buy one from me, the return shipping will be on you, however. (probably only a couple of dollars though)

Hope this helps,

Ben

[badwella]

Monday Bump!!

More DSSR's going out today. Multiple lengths and one left raw per customer request.



Best regards,

Ben

[phenryiv1]

What model and year is it in? I don't see any reason I couldn't make it. I have specs for the e36 models, but there are two lengths for pre and post 94/95.

Thanks,

Ben

Ben-

I'd be interested in a 95+ model.

The M52 that the guy above referenced would be 95+, as the M52 came in the 328 models, which replaced the M50 in the 325 models. 328s were late; 325s were early.

[Rainydays]

PM'd

[badwella]

Ben-

I'd be interested in a 95+ model.

The M52 that the guy above referenced would be 95+, as the M52 came in the 328 models, which replaced the M50 in the 325 models. 328s were late; 325s were early.

Awesome, thanks for clarifying.

I can make that no problem.

PM me and we'll get started.

Best regards,

Ben

[ElijahKnapp]

Monday Bump!!

More DSSR's going out today. Multiple lengths and one left raw per customer request.



Best regards,

Ben

Ooooo I hope one of these is mine. 😬

[Matt-B]

I have an m50

I have a g240

So I would need basically an m42 shift rod, as that is what I used.


Also, I like this, but one issue I have seen with other brands, is either a nut wouldn't fit. Or maybe rubbing. Just curious if you have installed pics, I have seen them rub on guibos are maybe the shifter support. Depending what people use.

[efficient]

Might be in for one of these later

[badwella]

Tuesday Update!

Shipping Friday March 4th:

///digitalme
ElijahKnapp
jrsaucke
Bimmer805
MogSpeedE30
JayDee906

Shipping Monday, March 7th:

E30DarkSide
RCtheRed
HollywoodDale187
jbgood

Shipping Friday, March 11th

Timeizmoney22
mitchlevy7
RCrawf
acolella76
darksideracer69

Shipping Monday, March 14th

Lobsterrodeo
Rainydays
Ciano
Gearhead4life

If you have paid and don't see your name on this list, PM me so I can make sure I didn't miss you somewhere


Thanks everyone!

Ben

[HollywoodDale187]

Super excited to get this in my car. No more floppy shifter.

[phenryiv1]

Tuesday Update!

Shipping Thursday/Friday March 3rd/4th:

///digitalme
ElijahKnapp
jrsaucke
Bimmer805
MogSpeedE30
JayDee906

Shipping Monday, March 7th:

E30DarkSide
ST1G
RCtheRed
HollywoodDale187
jbgood

Shipping Friday, March 11th

Timeizmoney22
mitchlevy7
RCrawf
acolella76
darksideracer69

Shipping Monday, March 14th

Lobsterrodeo
Rainydays
Ciano
Gearhead4life

If you have paid and don't see your name on this list, PM me so I can make sure I didn't miss you somewhere


Thanks everyone!

Ben

I just paid about 8 seconds ago so not on this list but I am looking forward to a DSSR for my 1997 328iC