[all parts came from 1991 318iS]
Mods please do not tow. This is pretty specific stuff for sale here. Thank you.
Alrighty, I FINALLY got around to taking pics of the stuff I pulled from my wrecked car...from a year ago. So, here is all this stuff. If you want closer pics of an item let me know and I will snap some. PM or email me offers. Feel free to post questions.
Pricing...everything is "NAME YOUR PRICE" unless otherwise noted. Offer what you think is fair and I will probably be OK with it. Help me clean out my yard!
Oh and the non-electronics have been out in my yard for about a year under a tarp. I will brush the rust off of anything you buy, no extra charge lol. Although a little dirty, this stuff was in working condition after the crash, I DID test most stuff. Read descriptions of stuff for more info...
SOLD. Tranny support.
The mounts are still available, & do not have any cracks that I could see and were still pliable.
Starter. Was working fine when removed. This was actually from my replacement 318iS, I put the modified one from my first car in my present one.
I have two clutch/flywheel sets. The clutch discs still have plenty of life on them. There is also a set of release parts (TOB, release fork, retaining spring, plastic pivit pin). One of the flywheels had the 2.5mm spacer ring removed for use in my M20 flywheel conversion. You could probably get some washers & put them on there...the ring was NOT on the crank side, it was there against the bolt heads.
Washer resivoir and pump. Pump was working when removed.
TRADED! Four wheel center caps for basketweaves. Sold as a set only. In good condition...about as much wear as you might expect from something 15 years old.
SOLD Fuel pump. Working fine when removed (I used it to empty the wrecked car's tank, so I know it was working).
Shifter boot. Decent condition. No tears, but it has a dry spot on the front. No discoloration, just a little rough.
Fuel rail electronic harness. The rail itself is in an upcoming pic.
Two pairs of rebuilt fog lights. These are for the plastic-bumpered E30's. I replaced the lenses on both with Acrylic units and put some 40-mil Lamin-X for added protection. One pair is missing the rubber surrounding, but it can be taken from your set you are replacing. Neither has the little rubber round plug thingies, but again, you can get them for like $.50 or from old units. These are the only of a couple items I actually have a price in mind for. Hoping for $200 per PAIR, OBO (ONE new one is $160+). Make an offer.
Steering wheel & airbag. I make no claims about it working as it is not something I can really test. The crash was a side impact, so it would not have deployed, so I know it did not malfunction at the time.
I have 2 sets of these, as well as an SRS Control Module (not pictured).
SOLD. Gauge cluster. It is in immacualate condition minus one part. The right mounting tab snapped off and disappeared within the dash. Should still be perfectly mountable though.
Rear seatbelt buckles. I have the upper parts in my attic. I also have the front seatbelts up there as well, all for sale, but as their respective sets only, no individual parts.
Stock E30 rear shock mounts. No cracks. Only used with stock shocks.
OEM brake master cylinder.
Brake fluid resivoir.
M42 valve cover cover-plate.
OEM US rear light assemblies. No cracks or damage. Includes bulbs & bulb trays with about 12" of harness cut off with them.
M42 Fuel Rail & pressure regulator
(PENDING SALE) M42 Throttle Body
ABS unit. I had to chop the harnesses, and left about 8" of wire.
Two sets of selaed beam headlight assemblies (rack & lights). One had the high's removed, but I had a pair of low's laying around still. I will send them with it, although I am unsure if they fit the same. The connector fits and they work properly though.
AC Condenser fan
Mods please do not tow. This is pretty specific stuff for sale here. Thank you.
Alrighty, I FINALLY got around to taking pics of the stuff I pulled from my wrecked car...from a year ago. So, here is all this stuff. If you want closer pics of an item let me know and I will snap some. PM or email me offers. Feel free to post questions.
Pricing...everything is "NAME YOUR PRICE" unless otherwise noted. Offer what you think is fair and I will probably be OK with it. Help me clean out my yard!
Oh and the non-electronics have been out in my yard for about a year under a tarp. I will brush the rust off of anything you buy, no extra charge lol. Although a little dirty, this stuff was in working condition after the crash, I DID test most stuff. Read descriptions of stuff for more info...
SOLD. Tranny support.
The mounts are still available, & do not have any cracks that I could see and were still pliable.
Starter. Was working fine when removed. This was actually from my replacement 318iS, I put the modified one from my first car in my present one.
I have two clutch/flywheel sets. The clutch discs still have plenty of life on them. There is also a set of release parts (TOB, release fork, retaining spring, plastic pivit pin). One of the flywheels had the 2.5mm spacer ring removed for use in my M20 flywheel conversion. You could probably get some washers & put them on there...the ring was NOT on the crank side, it was there against the bolt heads.
Washer resivoir and pump. Pump was working when removed.
TRADED! Four wheel center caps for basketweaves. Sold as a set only. In good condition...about as much wear as you might expect from something 15 years old.
SOLD Fuel pump. Working fine when removed (I used it to empty the wrecked car's tank, so I know it was working).
Shifter boot. Decent condition. No tears, but it has a dry spot on the front. No discoloration, just a little rough.
Fuel rail electronic harness. The rail itself is in an upcoming pic.
Two pairs of rebuilt fog lights. These are for the plastic-bumpered E30's. I replaced the lenses on both with Acrylic units and put some 40-mil Lamin-X for added protection. One pair is missing the rubber surrounding, but it can be taken from your set you are replacing. Neither has the little rubber round plug thingies, but again, you can get them for like $.50 or from old units. These are the only of a couple items I actually have a price in mind for. Hoping for $200 per PAIR, OBO (ONE new one is $160+). Make an offer.
Steering wheel & airbag. I make no claims about it working as it is not something I can really test. The crash was a side impact, so it would not have deployed, so I know it did not malfunction at the time.
I have 2 sets of these, as well as an SRS Control Module (not pictured).
SOLD. Gauge cluster. It is in immacualate condition minus one part. The right mounting tab snapped off and disappeared within the dash. Should still be perfectly mountable though.
Rear seatbelt buckles. I have the upper parts in my attic. I also have the front seatbelts up there as well, all for sale, but as their respective sets only, no individual parts.
Stock E30 rear shock mounts. No cracks. Only used with stock shocks.
OEM brake master cylinder.
Brake fluid resivoir.
M42 valve cover cover-plate.
OEM US rear light assemblies. No cracks or damage. Includes bulbs & bulb trays with about 12" of harness cut off with them.
M42 Fuel Rail & pressure regulator
(PENDING SALE) M42 Throttle Body
ABS unit. I had to chop the harnesses, and left about 8" of wire.
Two sets of selaed beam headlight assemblies (rack & lights). One had the high's removed, but I had a pair of low's laying around still. I will send them with it, although I am unsure if they fit the same. The connector fits and they work properly though.
AC Condenser fan
Comment