Announcement

Collapse

Classified Forums - Read this first!

Here's a few simple guidelines for this forum. Failure to follow any of these rules will be grounds for your thread to be closed


Post your information
Post as much info as you can. Say where you are located, where the part is located, the best way to get in contact with you, if you are willing to ship, etc.


Post the items information
Post as much info as you can. A price must be posted, as well as pictures of the item(s). Post as many pictures as you can, even if it is a common item. A picture tells a thousand words, but it can also conceal another thousand. Links to hosted galleries of images are acceptable, links to eBay and/or Craigslist are not. Once the item sells, please do not edit your ad to remove the price. Many people search through old ads to get an idea what their item is worth.


If listing a car
-Post the year and model
-An accurate mileage. If the odometer is broken, post what it is currently at and how many miles you believe it has
-Any aftermarket modifications
-Any known issues or damaged areas
-Post a price
-As many pictures as possible of every area


If listing wheels and/or tires
-Post the brand and model
-Post as many specs as you can, including but not limited to tire size, tread remaining, wheel diameter, width, offset, bolt pattern and centerbore, if multi-piece the lip, barrel and center size. If they have been redrilled post the original bolt pattern and where it was done.
-Any imperfections, including but not limited to curb rash, bends, cracks, repaired areas, scratches. If tires, any gashes, bubbles, cupping and curb rash
-Post a price
-As many pictures as possible of every wheel


If listing Parts
-What brand and what models it can be used on
-An accurate description
-How long it/they have been used for
-Any imperfections
-Post a price
-As many pictures as possible of every area


Miscellaneous items
-A detailed description of the item
-How long it/they were used for
-Any imperfections
-Post a price
-As many pictures as possible of every area


WTB threads
-Be as detailed as possible
-List exactly what you want, what variations you will accept, colors or materials, etc.
-Post what you won't accept. This includes imperfections, colors, models, etc.
-Post what you are willing to pay. Only douchebags will bump up their price if your price is higher then theirs.
-Where you are located and if you would prefer local pickup only


In case the point was not made, everything being sold must include a price and as many pictures as possible.
-This is not eBay or Craigslist. Do not post links to either for your ad. The same goes for other forums. Either post your information here or have your thread closed.
-Feeler threads are not allowed. If you're not sure about selling it, don't post it.
-If listing your item for trade, post what you are looking for, what you feel your item is worth, if you would like cash back or if you have cash to put on top
-Thread crapping is not allowed. If you're not interested in purchasing the item for sale or have nothing positive to add, please stay out of the thread or else be prepared for a time out. If you complain about the time out, it will be extended.
-Only bump your thread once a day. You are allowed to respond to others more then once a day.
-If listing multiple items, post them in one thread. Exceptions are cars and wheels.
See more
See less

Project Sell Off

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Project Sell Off

    I'm selling my project car. Things have changed and I just don't have the time for it anymore. I bought a house and since then my project car has taken a back seat time and finance wise. I hate to give up on it, but I just don't have any more time or money. I would prefer to sell the entire project. I have well over my asking my price ($6000) in parts and a lot of them are new.

    I do have the title for the chassis if you are interested in buying it.

    Decided I will part out. HMU if you are looking for something that's not listed.

    Car is not a roller! I can help load it on a flatbed with my father's tractor.

    If you are looking for pictures you can see some in my build thread, otherwise, it will take me some time to get pics as the car/project is at my father's shop.

    There's some stuff I may not have listed and some of the original parts from the car have been scrapped or sold.

    I have access to affordable freight through my business and can facilitate any of the heaver items that way.

    Any listed prices are without shipping or paypal fees

    Items will be marked sold when I get payment. so if it's not marked sold it is available.

    Chassis- 85 325e Coupe $750 with interior

    98 M52B28 (Cylinder head rebuilt with new valve guild and seals)(Engine is completely disassembled and I'm parting it out as well)
    Block is in good shape with factory hash marks and no visible ring ridge. Cleaned and painted
    Crank and Cams have been professionally polished
    5 Lug / e46 BBK kit (adapter kit bought here on the forums) original adapter set anodized blue
    4.10 LSD w/ New z3m finned cover and speed sensor Sold
    New Bilstein B8 Sports Shocks Front and Rear Sold
    Used Front Strut Housings with no bearings/hubs (bare spindles) $150
    New H&R Race Springs (50404-88) Sold
    New UUC Spec E30 adjustable sway bars and end links $400
    Adjustable and reinforced rear sub-frame
    Euro smiley headlights $250
    New Red46 Sump Armor $175
    Bimmerworld Sump Baffle installed in swap pan w/ dipstick, tube and gasket $200
    Reinforced front sub-frame (DIY welded, not pretty, but solid)
    New Ireland Engineering Race/Street adjustable camber plates $225
    New Turner Motorsports urethane reinforced rear shock mounts with reinforcement plates $125
    New Condor Bushing - Trailing arms, subframe, transmission and Engine
    New Bimmerworld FCAB
    New Lemforder front Control arms $150 for both
    New factory guibo and center support bearing
    Getrag 260
    Swap transmission brace $100
    New UUC angled DSSR for Getrag to 24v swap version $100
    New e36 Mishimoto Aluminum Radiator $250
    New 16"spal fan/universal mount kit and gasket $85
    Used Stock M52 headers w/ injection port welded and ceramic coated $150
    Refurbished euro bumpers in powder-coated shadowline black complete set with all soft parts new $1200
    Used Porche 944 booster $100
    Used E39 528i rear calipers - with rebuild kit
    Used E46 M3 front calipers -with rebuild kit
    Reprogrammed ECU with SAP/O2/EWS/Speed limiter delete $150
    E36 DS2 17x7.5 square wheels W/ Falken Falken Azenis RT-615K - 205/40R17 (New Tires Mounted and heat-cycled) selling wheels with tires $1100
    Used E46 330ci steering rack with new parts to rebuild parts and new tie rods and adapter/spacer kit $350
    Delrin power steering delete plate $20
    Door hinge reinforcement plates $20
    New E46 M3 front Rotors - Zimmerman Blanks
    New E46 325 Rear Rotors - ATE Blanks
    New Brake lines ECS Tuning Braided lines $100
    New E30 M3 Rear Hubs $200 Each
    New E30 M3 Rear bearings $30 each - 3 available
    New E36 Front Hub/bearing - FAG Hubs
    New Brake Pads - OEM compound (For E46 and E39 Calipers)
    Used Coolant expansion tank (late model) $30
    Rear Main and most engine gaskets - Purchased full top and bottom gasket sets, rings, and bearings. (M52)
    Short shift UUC EVO3 kit with new OEM selecter joint $275
    Lug Stud kit $150
    5mm front spacer and 17.5mm rear spacer (needed for 5 lug conversion kit)
    Custom exhaust t304 stainless w/ B&B tri-flow muffler and resonator (will mate to M20 headers) $500













    Last edited by Zekerbox; 09-09-2019, 04:09 PM.
    • 85 325e Project
    • 2010 Subaru STi hatch
    • 01 e39 M5 (sold) :down:
    • 00' E39 540ia (sold)
    • 89' 325is (sold)
    • 97' Ram 2500 12v Cummins
    • 2006 KTM 950 Adventure
    • 2006 Yamaha YZ450F

    #2
    Originally posted by Zekerbox View Post
    If you are looking for pictures you can see some in my build thread, otherwise, it will take me some time to get pics as the car/project is at my father's shop.

    Please link the pictures ASAP before this gets blackholed...
    Simon
    Current Cars:
    -1986 BMW 325e & 1968 Datsun Roadster 2000
    Previous Car Count : 21 ... and climbing...
    Originally posted by Melon
    Let it be known to all. Simon fucking keeps it real.

    Comment


      #3
      PM'd
      ------------------------------------------------------
      1982 528e - Sold
      1987 325e - Totalled
      1990 325is - Sold
      1997 540i6 - Sold
      1991 325ic - Sold
      2013 335i - Sold
      2005 X5 - Daily
      1991 318is - *work in progress*

      Comment


        #4
        Likewise. PMd this ... AM.

        Comment


          #5
          Seats for sale?
          1989 325i - sold
          1987 RX-7 Turbo II - sold
          1990 325i

          Comment


            #6
            Wow that definitely looks like it has good potential
            Simon
            Current Cars:
            -1986 BMW 325e & 1968 Datsun Roadster 2000
            Previous Car Count : 21 ... and climbing...
            Originally posted by Melon
            Let it be known to all. Simon fucking keeps it real.

            Comment


              #7
              Originally posted by 2mAn View Post
              Wow that definitely looks like it has good potential

              I really wish I had the time/money to get it all done. Life happens.
              • 85 325e Project
              • 2010 Subaru STi hatch
              • 01 e39 M5 (sold) :down:
              • 00' E39 540ia (sold)
              • 89' 325is (sold)
              • 97' Ram 2500 12v Cummins
              • 2006 KTM 950 Adventure
              • 2006 Yamaha YZ450F

              Comment


                #8
                My brother-in-law has told me he is interested in buying or possibly funding my project. So....I'm currently on hold with parting it out. If mods need to remove or lock this thread, please do.
                • 85 325e Project
                • 2010 Subaru STi hatch
                • 01 e39 M5 (sold) :down:
                • 00' E39 540ia (sold)
                • 89' 325is (sold)
                • 97' Ram 2500 12v Cummins
                • 2006 KTM 950 Adventure
                • 2006 Yamaha YZ450F

                Comment


                  #9
                  Bump. Back up for sale. FYI the car is not at my house and it's difficult for me to get pictures or specific info until the weekend. I will be posting some prices and more info as I have time.


                  Sent from my iPhone using Tapatalk
                  • 85 325e Project
                  • 2010 Subaru STi hatch
                  • 01 e39 M5 (sold) :down:
                  • 00' E39 540ia (sold)
                  • 89' 325is (sold)
                  • 97' Ram 2500 12v Cummins
                  • 2006 KTM 950 Adventure
                  • 2006 Yamaha YZ450F

                  Comment


                    #10
                    Originally posted by Zekerbox View Post
                    Bump. Back up for sale. FYI the car is not at my house and it's difficult for me to get pictures or specific info until the weekend. I will be posting some prices and more info as I have time.


                    Sent from my iPhone using Tapatalk
                    PM'd

                    Comment


                      #11
                      Interested in the bilsteins and h&rs!!!
                      Hank Ahrens
                      1984 Alpine Coupe
                      1978 911sc

                      Comment


                        #12
                        Project sell off.

                        PM'd about
                        New E30 M3 Rear Hubs
                        New E30 M3 Rear bearings
                        Thanks
                        Tim

                        Comment


                          #13
                          Bump - Shocks Sold
                          • 85 325e Project
                          • 2010 Subaru STi hatch
                          • 01 e39 M5 (sold) :down:
                          • 00' E39 540ia (sold)
                          • 89' 325is (sold)
                          • 97' Ram 2500 12v Cummins
                          • 2006 KTM 950 Adventure
                          • 2006 Yamaha YZ450F

                          Comment


                            #14
                            Bump, Tons of great parts available.
                            • 85 325e Project
                            • 2010 Subaru STi hatch
                            • 01 e39 M5 (sold) :down:
                            • 00' E39 540ia (sold)
                            • 89' 325is (sold)
                            • 97' Ram 2500 12v Cummins
                            • 2006 KTM 950 Adventure
                            • 2006 Yamaha YZ450F

                            Comment


                              #15
                              Originally posted by Zekerbox View Post
                              Bump, Tons of great parts available.
                              How much for the 2.8L crank?
                              '91 318is
                              '03 540iT M-Sport
                              '76 2002

                              Comment

                              Working...
                              X