FS: E30 Koni Sports (Adj Yellows) Front and Rears

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rcko
    Wrencher
    • Mar 2007
    • 295

    #1

    FS: E30 Koni Sports (Adj Yellows) Front and Rears

    SOLD

    I have a comlete set of Koni Sport Shocks/struts that came off my '88 325is. The PO owner included these with the sale of the car. These were used on the car for autocross and trackdays. These are rebound adjustble only and the FRONT are top adjustable. The REARS are not top adj, only the fronts. The rears are of the type where you have to compress the shock and turn. Meaning you would have to detach the 17mm bolt from the lower rear arm compress and turn to adjust the rears. The rears have mounts attached to them already.

    There is surface corrosion on the wear surfaces at the front mount, but nothing a good scoth brite pad cant remove. I really dont know how many miles are on them besides them being at least 4 yrs old. I was asking $300 but after inspecting them upclose and seeing some of the surface rust I figure I will drop the price to $200.

    There are no leaks. I tried to compressed them and they are pretty darn stiff plus rebound fully.

    I am selling the complete set for $200 given their current appearnce.

    PM if interested or offers. Will consider trades for a 173 DME performance chip



    Last edited by rcko; 06-20-2007, 02:37 PM. Reason: SOLD
    sigpic
    - 0.05s and 0.1s FTW!!!
  • Apex381
    Mod Crazy
    • Mar 2004
    • 740

    #2
    pics? what condition are they in?
    1987 325is - sold
    2001 330i - New DD

    Comment

    • Fanzotti
      Banned
      • May 2006
      • 1255

      #3
      I'm interested. Are they top adjustable all around?

      Comment

      • rThor432
        No R3VLimiter
        • Feb 2007
        • 3907

        #4
        If these are top adjustables then put me in line to pick them up, in case others dont go for it. Let me know a price shipped to 28214, thanks.

        Comment

        • atomic
          R3V Elite
          • Jun 2007
          • 5691

          #5
          To me the rears do not look to be top adjustables. My new top adjustables have the exact same adjustment knob on top as the fronts do. And to me these rears seem to be different than the fronts

          Comment

          • rcko
            Wrencher
            • Mar 2007
            • 295

            #6
            I just got done looking in the Koni site and have to agree with Mr. Atomic.

            The rears are not top adj, only the fronts. The rears are of the type where you have to compress the shock and turn. Meaning you would have to detach the 17mm bolt from the lower rear arm compress and turn to adjust the rears.

            The front are top adjusted. However I do not have the plastic adjustment knob tool.

            Updated first post to reflect this
            sigpic
            - 0.05s and 0.1s FTW!!!

            Comment

            • atomic
              R3V Elite
              • Jun 2007
              • 5691

              #7
              rcko I wasn't tring to run a sell for you but rather I noticed these and was going to tell a friend about them that was looking for some but then realized they were what I stated. Sorry if it hurt you selling them.

              Comment

              • rcko
                Wrencher
                • Mar 2007
                • 295

                #8
                Dude, no problem... I was wrong to assume the top nut on the rears was an adj. No worries no harm done, If anything the correct info is out now
                sigpic
                - 0.05s and 0.1s FTW!!!

                Comment

                • Apex381
                  Mod Crazy
                  • Mar 2004
                  • 740

                  #9
                  pm sent
                  1987 325is - sold
                  2001 330i - New DD

                  Comment

                  • 8atman
                    E30 Addict
                    • Apr 2007
                    • 492

                    #10
                    PMED I will take these if no one else has already.

                    Thanks

                    Ash

                    Comment

                    • rcko
                      Wrencher
                      • Mar 2007
                      • 295

                      #11
                      Sale Pending to Apex381.

                      Thanks for all the inquiries.
                      sigpic
                      - 0.05s and 0.1s FTW!!!

                      Comment

                      • 8atman
                        E30 Addict
                        • Apr 2007
                        • 492

                        #12
                        DAmn I really needed these :( Please flake please flake please flake....

                        Comment

                        • 8atman
                          E30 Addict
                          • Apr 2007
                          • 492

                          #13
                          are these babies sold? :(

                          Comment

                          Working...