Odds & Ends - Hood, Euro Pigtails, Speedo Plug, Etc

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wildstoats
    E30 Modder
    • Sep 2007
    • 896

    #1

    Odds & Ends - Hood, Euro Pigtails, Speedo Plug, Etc

    I'm looking for a set of plugs for some Bosch ellipsoids. I'm not shy about wiring so just the plugs would be fine as long as I have some wire to work with.

    I specifically need 2 plugs keyed for this socket:



    While I'm at it I also found some more stuff that I need:

    • 2x - Bosch Euro High Beam Connectors (see above)
    • 2x - Euro Light Bulb Retaining Clips (little metal springs that hold the bulbs against the housings)
    • Front Passenger Side Turn Indicator (Plastic bumper car) - BOUGHT!
    • 6-cylinder coding plug - (late model Motometer cluster) - BOUGHT!
    • Speedometer plug (differential, someone cut mine off!) - BOUGHT!
    • Diamond Schwarz Hood - Ohio / Pennsylvania Area or Willing to Ship!




    Thanks in advance.
    -B
    Last edited by wildstoats; 08-05-2010, 08:21 AM.
    $500, Diamantschwarz, and a Dream
  • phenryiv1
    No R3VLimiter
    • Jul 2009
    • 3246

    #2
    Originally posted by wildstoats

    While I'm at it I also found some more stuff that I need:
    • Speedometer plug (differential, someone cut mine off!)

    Thanks in advance.
    -B
    You need the car-side harness and plug that goes INTO the speedo sensor on the diff, correct?
    Patrick Henry

    1989 325iC build: http://www.r3vlimited.com/board/showthread.php?t=316880


    Comment

    • wildstoats
      E30 Modder
      • Sep 2007
      • 896

      #3
      Originally posted by phenryiv1
      You need the car-side harness and plug that goes INTO the speedo sensor on the diff, correct?
      Correct. I have the sensor installed in my diff cover. However I have no plug. Currently I have two female spade terminals crammed on there to give me a workable signal. So hood, haha.
      $500, Diamantschwarz, and a Dream

      Comment

      • phenryiv1
        No R3VLimiter
        • Jul 2009
        • 3246

        #4
        Originally posted by wildstoats
        Correct. I have the sensor installed in my diff cover. However I have no plug. Currently I have two female spade terminals crammed on there to give me a workable signal. So hood, haha.
        I have one. $10 shipped to you?
        Patrick Henry

        1989 325iC build: http://www.r3vlimited.com/board/showthread.php?t=316880


        Comment

        • wildstoats
          E30 Modder
          • Sep 2007
          • 896

          #5
          Speedo plug crossed off. Thanks!
          $500, Diamantschwarz, and a Dream

          Comment

          • McGyver
            R3V Elite
            • Jun 2009
            • 4422

            #6
            for the headlights, go to the junkyard and cut the plugs off 2 cars that go into the windshield washer reservoir pump. you'll have to cut one side down with a knife, but they work perfect!
            sigpic
            1987 - 325i Convertible Delphin Auto [SOLD], 325i Convertible Delphin Manual [SOLD]
            1989 - 325i Convertible Bronzit m30b35 swapped [SCRAPPED], 325i Sedan Alpine Auto[DD]
            1991 - 325i Coupe Laguna Manual [Project], 535i Sedan Alpine [SCRAPPED]

            Comment

            • wildstoats
              E30 Modder
              • Sep 2007
              • 896

              #7
              Originally posted by McGyver
              for the headlights, go to the junkyard and cut the plugs off 2 cars that go into the windshield washer reservoir pump. you'll have to cut one side down with a knife, but they work perfect!
              Now that's what I call a pro-tip. :up: I will give it a try.
              $500, Diamantschwarz, and a Dream

              Comment

              • phenryiv1
                No R3VLimiter
                • Jul 2009
                • 3246

                #8
                Originally posted by wildstoats
                Speedo plug crossed off. Thanks!
                Packed today. Shipping at the PO right after work.
                Patrick Henry

                1989 325iC build: http://www.r3vlimited.com/board/showthread.php?t=316880


                Comment

                Working...