S52 swap parts needed

[surebimmer]

Hello guys, I just picked up an S52 so I need some parts so I can do this swap. If you have any of these items let me know.

e28 535i motor mounts

e34 525i M50 oil pan

e34 525i oil sump

e34 525i dipstick tube and dipstick

e36 throttle cable

I also need the parts to make this motor an OBD1.

OBD1 ECU 413 "red label"

Let me know what you got a price with shipping to 94588.

Thanks

[JGood]

I have an OBD-I intake manifold. PM me with an offer. I'm in PA, but will ship.

[vr4boy]

e34 525i M50 oil pan

e34 525i oil sump

e34 525i dipstick tube and dipstick

i have these and a to be cut down 320i booster....pm me for price if interested

might have the 413 ecu too but,let me check...

[Funkmasta]

I have a complete OBD1 swap (minus HFM), $925.
Includes:
ECU (506)
Wiring harness
Intake Manifold
Coolant hose
Modified coolant pipe fitting
Throttle body
All hoses and related
Plugs for headers
OBD1 fuel rail and fuel rail cover

Let me know, cheers
Joe

[new guy]

I have the OBDI manifold, Wiring harness, Oil pan with pump and dip stick and tube. I have been holding onto them for a year in case I took on another project... Would sell not actively trying though... would be coming from 60010.

Throttle cable is a cheap pick up from the dealer with club member pricing. Get new hoses for the wear factor.

you will need to tap the head for the extra sensor for OBDI in an E30 as it has two temp sensors. One is for the gauge and one is for the ECU. In the E30 the Gauge temp sensor runs at a different ohm/ resistance then the ECU sensor. The OBDII uses a dual sensor both sides of the sensor run at the same resistance/ ohms. So we have figured out...

[surebimmer]

I just bought a harness from a 94 325i non ews. I was going to buy the Water Temp Sensor Wiring Adaptor from turner motorsports 2 into 1. $49.95 and the coolant hose adapter as well.

[new guy]

I just bought a harness from a 94 325i non ews. I was going to buy the Water Temp Sensor Wiring Adaptor from turner motorsports 2 into 1. $49.95 and the coolant hose adapter as well.

If you are putting into an E36 no problems.

[surebimmer]

If you are putting into an E36 no problems.

Why can't you use that on an E30? Won't it plug into the E36 harness that I'm going to be using? I still need a 413 DME, Anyone?

[Lobstrosity]

Why can't you use that on an E30? Won't it plug into the E36 harness that I'm going to be using? I still need a 413 DME, Anyone?

The e36 temperature gauge uses a different resistance range (or something along those lines), so the adaptor thing will let you plug it in, however it won't work with our e30 gauge.

Supposedly. Turner keeps saying it works, though, so I don't know who to believe :(

[Addissimo]

I've got an obd-1 hfm (from a 95 m3)