If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Window regulator/motor, driver side rear, early model
I will sell you the one out of my 89. I don't know how early it has to be but it is indeed the cable type. $25 shipped.
Is it the motor and the regulator? If so, I'll take them. Can you send me pics just to verify it's the same part? In the meantime I'll verify that the part numbers are the same.
I see what you mean. In looking that this, I am wondering if you could retrofit the newer assembly into the older car if you also used the newer glass and harness. It seems like the motor itself sits in the exact same position but the holes for the top and bottom of the newer assembly might not be there.
I see what you mean. In looking that this, I am wondering if you could retrofit the newer assembly into the older car if you also used the newer glass and harness. It seems like the motor itself sits in the exact same position but the holes for the top and bottom of the newer assembly might not be there.
The same thing crossed my mind. But if that's the case, I'll pull what I need from my 89 parts car. I'll take both door panels off and see if it looks possible sometime soon...
But in the mean time, I'll still take a early model regulator and motor if someone has them.
Comment