WTB: Some AC Parts and Some other Random Things for 89 325i

[gilber33]

I am looking for a complete A/C setup for my 89 325i. My car came with the whole AC system deleted, and I am looking to restore that. I need everything on the front side of the firewall - hard lines, hoses, condensor, aux fan, compressor.

Please let me know what you have. I'd prefer to buy a whole setup as opposed to piecing it together.

Thanks

[jeffnhiscars]

I have most of that here on an 88 Cab but never saw it working.

[D3R3K]

I have a complete working a/c system still installed in a 86 325e

[gilber33]

I have most of that here on an 88 Cab but never saw it working.

It’s the really the lines I’m after. I would replace the wear components with new. Can you send me a couple pics?

[gilber33]

I have a complete working a/c system still installed in a 86 325e

I would want to confirm that all of the components are the same between a 325e and 325i. I'm also not sure if the pre-88 systems are any different. A couple pics of the lines would be helpful in comparing.

Thanks

[jeffnhiscars]

Other than the change to r134 compatible seals in the r12 compressor and the pressure switch configuration, all of the components are interchangeable on 6 cyl e30s

[gilber33]

Other than the change to r134 compatible seals in the r12 compressor and the pressure switch configuration, all of the components are interchangeable on 6 cyl e30s

But in my searching for AC parts I have found AC compressors that have two different types of line fittings and then I have found different suction lines from the firewall where some have a Schroeder valve and some do not. I guess if I find an entire system that is untouched, it's not an issue, but I may have someone who has the compressor out of my car from years ago and I would want to confirm the parts are compatible.

[svn2002s]

I have a full system out of a 91 coupe. Let me know exactly what you need.

[gilber33]

I have a full system out of a 91 coupe. Let me know exactly what you need.

I need everything in front of the firewall. The two hard lines along the fender, both hoses that go to and from the condenser, the condenser w/ aux fan, and the compressor.

[svn2002s]

PM sent

[gilber33]

I found most of what I need, however, there are a couple things I forgot to get:

-Suction Hose - the hose from the firewall to the compressor (the one I got isn't in the best of shape)
-Radiator Temp Switch- the sensor that kicks on the aux fan (assuming it's the 3 prong version)
-Interior AC switch - assuming it's in good condition
-Radiator Temp Switch Connector Pigtail - two of the three wires on mine are broken off at the connector.
-Windshield Washer Reservoir