Sold !
Melber 8x16 et11 5x120, so they're going to be for folks with native 5x120 vs using adapters from 4x100 hubs.
$500 obo + shipping from 48203.
lots more pictures here.
pm here or email at s38b35@gmail.com
a classic 80s looking wheel, with reasonable lip. Melber is a brand I've not seen much before about and most sets <FS> found via the googles seem to be 4x100 with exposed lugs. the name sounds German, but they are made in Italy as shown on the rear or the wheel.
center caps are held on with a bolt, you choose to go with black or silver. caps are metal for the cross-spoke-y bit and have a plastic center piece. original Melber decal/sticker/whatever is present, but finish is damaged due to having had random BMW decals put over them. I suspect the center piece is a common diameter, I will measure it. if it is, one could probably use all manner of other wheel components. I suspect the Melber decal could be removed carefully as well and another decal placed cleanly onto them.
the clearcoat is not perfect on any of the wheels and there is a bit of rash on each, nothing serious. refinished these would be seriously sweet, as they are now they would look fine from 15 feet away until you have time/money to refinish.
Melber 8x16 et11 5x120, so they're going to be for folks with native 5x120 vs using adapters from 4x100 hubs.
$500 obo + shipping from 48203.
lots more pictures here.
pm here or email at s38b35@gmail.com
a classic 80s looking wheel, with reasonable lip. Melber is a brand I've not seen much before about and most sets <FS> found via the googles seem to be 4x100 with exposed lugs. the name sounds German, but they are made in Italy as shown on the rear or the wheel.
center caps are held on with a bolt, you choose to go with black or silver. caps are metal for the cross-spoke-y bit and have a plastic center piece. original Melber decal/sticker/whatever is present, but finish is damaged due to having had random BMW decals put over them. I suspect the center piece is a common diameter, I will measure it. if it is, one could probably use all manner of other wheel components. I suspect the Melber decal could be removed carefully as well and another decal placed cleanly onto them.
the clearcoat is not perfect on any of the wheels and there is a bit of rash on each, nothing serious. refinished these would be seriously sweet, as they are now they would look fine from 15 feet away until you have time/money to refinish.
Comment