JOM Coilover Group Buy

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • mightywhitey
    replied
    List updated

    Leave a comment:


  • CHIF8008
    replied
    so anyone put this on yet?? so if they are stock length, we cant cut sections out of the front?
    Last edited by CHIF8008; 11-24-2010, 01:07 PM.

    Leave a comment:


  • DivineStyler
    replied
    Originally posted by erik325i
    I haven't put them in yet, but compared to other coilover kits I've used, if you want to run it low with stock length struts, you will be on the bump stops.

    Here is my 325i (not the car getting these JOM coils). Before I shortened the strut housings, I was on the bump stops just sitting there, so I had no suspension travel.

    can someone speak in lame mans terms... sorry I'm still learning... school me on bump stops? Does that mean the will basically be at the lowest position sitting on the part which prevents the car from dropping down any lower when it hits a bump?

    If so the ride will be very stiff and hard yes? I don't know please explain... thanks.

    Leave a comment:


  • erik325i
    replied
    Originally posted by CorvallisBMW
    So if you're going 2-3" lower on a stock-length shock with soft springs.... Are you riding on the bumpstops a lot?
    I haven't put them in yet, but compared to other coilover kits I've used, if you want to run it low with stock length struts, you will be on the bump stops.

    Here is my 325i (not the car getting these JOM coils). Before I shortened the strut housings, I was on the bump stops just sitting there, so I had no suspension travel.

    Leave a comment:


  • CorvallisBMW
    replied
    Originally posted by erik325i
    Unfortunately, they are stock length.
    Also, the springs are pretty damn soft. They'll be fine for the beater I'm putting them in, but I wouldn't put them in any car you plan on driving aggressively.
    So if you're going 2-3" lower on a stock-length shock with soft springs.... Are you riding on the bumpstops a lot?

    Leave a comment:


  • erik325i
    replied
    Originally posted by mightywhitey
    If you have received your coil overs please let me know as well as I will be marking you as received on the list. Thanks, Mike
    I received mine yesterday.

    Originally posted by Stephen
    are the shocks even short enough to allow for sectioning? If it is, i may consider these but if they are regular length, you wont get very low
    Unfortunately, they are stock length.
    Also, the springs are pretty damn soft. They'll be fine for the beater I'm putting them in, but I wouldn't put them in any car you plan on driving aggressively.

    Leave a comment:


  • einstein57
    replied
    Out for delivery. Can't hardly wait

    Leave a comment:


  • mightywhitey
    replied
    list updated.

    Leave a comment:


  • ck_taft325is
    replied
    Looked roughly the same length as the odd Billie sport I had kicking around in the garage. No actually measurement but a side by side. I'll try and find my camera and get some pictures.

    Leave a comment:


  • Stephen
    replied
    has anyone compared front strut length to regular strut length yet?

    Leave a comment:


  • ck_taft325is
    replied
    Recieved today. A couple days ahead of schedule.

    Leave a comment:


  • CabbE30
    replied
    Once you guys start posting and reviewing make sure to do it in the JOM thread in the suspension section so that we can keep this thread cleaner for the people who want to buy.

    Last edited by CabbE30; 11-22-2010, 09:43 AM. Reason: Added link

    Leave a comment:


  • motorsports_3
    replied
    Wow please install these. I am about to bite the bullet.

    Leave a comment:


  • jintermont
    replied
    I got an email from les yesterday apologizing for the mix up and he is shipping the correct parts out today.

    Leave a comment:


  • ck_taft325is
    replied
    Mine are 2 days out. Not sure I'll get these on until Dec. 12th or so. S50 swap, coils and wheels all going on roughly in the same week.

    Leave a comment:

Working...