Announcement

Collapse
No announcement yet.

PnP Megasquirt Systems - Updated 2/16, Pricing Change

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    My bad... I'm not the greatest with circuit boards. I see the diode and the pin 40 hole.

    I'll update later this week! [emoji106]

    Sent from my LG-H933 using Tapatalk

    Comment


      It's not a jumper. There was a trace missing on the board, so the diode and the pin are not connected. Which is why you don't have 5v at pin 40. You have to solder a small wire between those two points pictured.

      RISING EDGE

      Let's drive fast and have fun.

      Comment


        Yes, sorry... what I meant by jumper was the plastic coupler that I circled in green. That coupler can connect or disconnect 2 pins depending on how it's sitting. Initially I thought that was a "jumper" that needs to be moved.

        I will be soldering / connecting the diode & pin 40 hole this weekend.

        Thanks again for the huge help / info!!!

        Sent from my LG-H915 using Tapatalk

        Comment


          Got it working... thanks again!!!!
          Once I've got the exhaust cutout in place, it'll be time to make some noise.

          Sent from my LG-H933 using Tapatalk

          Comment


            Has anyone gotten I contact with blueapplesoda at all??

            Comment


              Derek hasn't logged on to r3v since 7/18. His site(s) are also gone again, but google does have this info:

              Dederic Motorsports
              Address: 8945 Quartz Ave, Northridge, CA 91324
              Open ⋅ Closes 6PM
              Phone: (818) 527-5001

              However, the number might be a google voice number, and there's no specific VM.

              Basically, he seems to come and go, but is sometimes reachable, so keep trying if you are really interested.

              Comment


                If you're still doing these message me fam, I'd love an ms3pnp unit for my m30 swap
                Jah bless! :pimp:

                Comment

                Working...
                X