German Engineering Suspension GB

[Luis325]

Would these work on e30 front M3 struts????

[PNWDan]

I was getting popping noises at times, used some generic silicon lubricant spray around the underside of the plates with them on the car, got rid of the noise and it hasnt come back in the last 3 weeks...

It will don't worry or your nut on top will just come loose.

[Northern]

Whenever this next groupbuy is, I'm in. H&R Race fronts are too weak for me, and my camber plates are trying to eat my spring hats unless I add spacers everywhere I can.

Is something still going on in july with this?

[einstein57]

Would these work on e30 front M3 struts????

Yes. reelizmpro is running them on his white m3. You don't have to cut the perches off in order to use them. The next round will come with 5" front springs.

[PNWDan]

Yes. reelizmpro is running them on his white m3. You don't have to cut the perches off in order to use them. The next round will come with 5" front springs.

Will you have the 5" springs available separately? Im thinking I would like to drop it a bit more.

[einstein57]

Yes. I'm sure there will be spares from the people who want to stick with the 6-7" springs.

[1badsup]

I'm in for the next group buy. Any idea when that will be?

[einstein57]

within the next couple months

[djjerme]

600# springs worked awesome yesterday for my first Area race. Was able to set a new personal best, even after getting punted off track midway in. The front end felt a lot more planted, even in the wet. The rear end on the other hand, not so much! I definitely need to step it up from the 650's to something in the 700 or possibly even 800 range if I want to run the rear sway disconnected.

Thanks again man!

[einstein57]

The guys a bullet performance recommend 800 rears with no sway.

[djjerme]

That's the way I am leaning. It got a bit squirmy in the rear when it was raining at the mid point of the Saturday race (even with brand new R888's all around..)

[Dave]

Sent you a PM. thx!

[formula driver]

Forgive me for not doing much reading in here, but is this still going on?

I may need 2 sets.

-Paul

[einstein57]

gearing up towards round 2

[timninja]

I bet you dont recommend to,but how long do you think I could drift on a set of these?
I mean id rather blow out a few $300 sets of cheap coils then $1200+ sets hah