“Bavauto” Headers Group Buy Round 3 (NOW CLOSED)

[Bullet Ride]

Bump.

[delatlanta1281]

I need another m20. So I can buy a set....

[wannaBMthree]

Bump.

Are these stainless or raw steel uncoated? Thx.

[Bullet Ride]

Are these stainless or raw steel uncoated? Thx.

They are not stainless.

I'm going to wait another week or so and then close off this group buy. I'll talk to Tubular and see if they are ok with only doing 5 sets. If not I'll wait a little while and we'll try doing this again in the new year.

[WarHammer 2/1]

For the 325i set, do you need the flange installed to bolt up to a stromung cat-back exhaust?

[Bullet Ride]

For the 325i set, do you need the flange installed to bolt up to a stromung cat-back exhaust?

Yes, you need the flange if you want it to bolt up. If there's no flange it's just a 2" slip fit.

[WarHammer 2/1]

Yes, you need the flange if you want it to bolt up. If there's no flange it's just a 2" slip fit.

Is it still $10-$15 to get it installed?

[Bullet Ride]

Is it still $10-$15 to get it installed?

Last time it was $8.

[WarHammer 2/1]

Last time it was $8.

Do you need a special O2 sensor with these headers?

[Bullet Ride]

Do you need a special O2 sensor with these headers?

You can either extend the wiring of the stock one or replace it with an O2 that has a longer pig tail. 13037 is the Bosch part number for the old style (push) connector, the new style (screw on) Bosch part number is 13052.

[wannaBMthree]

Cheers Bullet, Mark me down for a set for now or later.

E28 535 coated, no mid

[Bullet Ride]

You can put yourself down you know

The list:
1) Mlarsen, E30 325i, mid-pipe included, uncoated (R3V)
2) Nanajoth, e28 535i, mid-pipe included, uncoated ( MyE28 )
3) 6cyl, e30 325i, mid-pipe excluded, coated (R3V)
4) EyExR, E30 325, no mid-pipe, coated (R3V)
5) berlow94 E30 325i, no mid-pipe, coated (R3V)
6) wannaBMthree, E28 535i, no mid-pipe, coated (R3V)
7)
8 )
...
...
...

[cgk_iii]

Bump for these awesome headers! Picked up a set for my m20 last round. Great product and excellent service ! Bullet Ride is a cool guy and easy to work with. Wish i could get another set for my m10 but its out of the budget for now.

Side note: get them ceramic coated.. The extra wait/cash is definitely worth it.

[Bullet Ride]

List update

1) Mlarsen, E30 325i, mid-pipe included, uncoated (R3V)
2) Nanajoth, e28 535i, mid-pipe included, uncoated ( MyE28 )
3) 6cyl, e30 325i, mid-pipe excluded, coated (R3V)
4) EyExR, E30 325, no mid-pipe, coated (R3V)
5) berlow94 E30 325i, no mid-pipe, coated (R3V)
6) wannaBMthree, E28 535i, no mid-pipe, coated (R3V)
7) EnduroDriver, E28 535i, mid-section included, uncoated ( MyE28 )
8 )
...
...

[6cyl]

Maybe post to oppositelock. there are a few e30 guys over there and at least one e28, a couple e24's and a few 2002's.