5 Lug and BBK Group Buy Round 2 **NOW SHIPPING KITS

[LowR3V'in]

Is there a thread where I can discuss these? I have some questions.
Yes I am interested in buying.

[Bmwmotorm52]

Will this kit work with E46 330i front brakes?

[elcoy]

Have these been track tested?


Sent from my iPhone using Tapatalk

I have done several HPDE's on my setup with no issues.

Interested in the front only set.

PM Sent!

[Dagamus(NM)]

Interested in the front only set.

[erynapolean777]

Have these been track tested?


Sent from my iPhone using Tapatalk

[elcoy]

any of these kits still available?

PM sent!

[mrpizat]

any of these kits still available?

[Matt-B]

i have rear e39 brakes if someone is intersted.

comes with rebuild kits, bushings, etc

[cwlo]

So I put together a nice solution for the rear brake line, using a 9" stainless brake hose, with a banjo end on one end, a AN 3 female on the other. Then got a conversion coupling to change the hardline outlet to AN3 for the hose to hook onto.

Also went with different bolts than the kit. The rear bolts were too long, so I ordered shorter ones, and the fronts were too short, so I ordered longer ones. I can put up all the part numbers if anyone needs them. ( I used z4 rear hubs, so bracket was machined)

Won't be able to road test for a couple weeks, but it all fits together nicely.

Chris

[Jon_A]

Ok I was thinking of using loctite since the lock ring cant be used anymore.

[cwlo]

I did not use loctite on the hub bolts, but I did on the brake backing plate screws. Seems like they always loosen up over time.

Chris

[Jon_A]

Do you guys use loctite on the hubs front and rear?

[cwlo]

Yes Jon, i thougt that might be a good solution as well, but I am not sure if the caliper needs a milled face for the sealing washer to seal to. Let me know if you know the answer, as it would be a nice solution. Perhaps a little time with a file would get the job done, as the caliper has a raised area where the line connects.

Chris

[Jon_A]

Thanks Jon, Yes, its an option, but the hardline really needs support on both ends. Otherwise vibration will work it over time.

I'll keep looking into it, and see if I can find a better solution.

Thanks,

Chris

Maybe you can find some of these to suit your application, with banjo bolts.

http://www.ebay.com/itm/Venhill-M10-90-Deg-Long-Side-Bend-Banjo-Black/302077557592?_trksid=p2485497.m4902.l9144

http://www.ebay.com/itm/Wezmoto-Rear-Braided-Brake-Line-Honda-CR250R-1990-1991/130992255399?_trksid=p2485497.m4902.l9144

[elcoy]

Any kits left?

I would be interested in a set of front pieces only. I have the rear parts already. Let me know if you still have anything to sell me!

PM's Sent!