Cross Brace for your E30

[ejnight]

Eric are you saying that you personally tested the fit of aftermarket sways or "heard" that certain ones will work? If you did test the fit of specific bars can you say which ones or if you heard that certain sways fit without interference can you put me in contact with those who have actually tried various bars with your brace?

I need some more specifics before I purchase another set of sways (I tried the IE 22 front bar already). I am considering options other than the IE 25mm bar because that seems too large for my purpose.

Thanks

I have installed braces on a few cars. most all used the 25mm. there was one that had a yellow bar. no name and it fit. I have sold lot of these and the 22mm IE is the only one I have heard of any fitment issues.

[Bearmw]

Eric are you saying that you personally tested the fit of aftermarket sways or "heard" that certain ones will work? If you did test the fit of specific bars can you say which ones or if you heard that certain sways fit without interference can you put me in contact with those who have actually tried various bars with your brace?

I need some more specifics before I purchase another set of sways (I tried the IE 22 front bar already). I am considering options other than the IE 25mm bar because that seems too large for my purpose.

Thanks

[RobE30]

Very cool man. I see the cross brace and a new driveshaft in my cars near future

[ejnight]

So aside from stock or the IE 25mm sway bar will your brace work with any other aftermarket bars without modifications?

but the 22mm IE that I have seen

Every one

are the plates cut on a water-jet? How is that being done?

Laser

[sector6]

are the plates cut on a water-jet? How is that being done?

[Bearmw]

So aside from stock or the IE 25mm sway bar will your brace work with any other aftermarket bars without modifications?

[ejnight]

All orders shipped. Some stock left. Going fast.

[Vivek]

Gonna be picking one of these up probably within the next month.

[ToPLeSS(e30)FeinD]

price is ok, will be picking up a plate very soon here. wanted a brace as i haz vert, but dont think i will have enough clearance...

[ejnight]

You guys have saved my ass so many times with my skid plate, I fee like I owe it to you to buy one of these. Soon. Very soon. <3

There in stock and ready to go. :)

[JCarp90]

You guys have saved my ass so many times with my skid plate, I fee like I owe it to you to buy one of these. Soon. Very soon. <3

[ejnight]

can i get a price for the X brace and skid plate for e30 s52 swap, shipped to 01902?

$429 shipped

[goldtl]

can i get a price for the X brace and skid plate for e30 s52 swap, shipped to 01902?

[ejnight]

thanks for getting back to me so quickly.
Once it's bolted up,
What could I look for?
What are the differences?
Just more clearance near the lollipop?
Thank you.

yes

[iwantspeed]

its so close it very hard to tell with out bolting it up. Sorry.

thanks for getting back to me so quickly.
Once it's bolted up,
What could I look for?
What are the differences?
Just more clearance near the lollipop?
Thank you.