Cross Brace for your E30

[iwantspeed]

Hello Eric,
I recently purchased your x brace used from a member.
I would like to know if there is any way to check if its a later model x brace that would allow me to use the brace with my offset m3 control arm bushings.

post 98 and 99 on page 7 explain that all new braces will clear and that post was April 2010

http://www.r3vlimited.com/board/showthread.php?t=144004&highlight=race+skids+cross+brace&page=7

[ejnight]

Hello Eric,
I recently purchased your x brace used from a member.
I would like to know if there is any way to check if its a later model x brace that would allow me to use the brace with my offset m3 control arm bushings.

post 98 and 99 on page 7 explain that all new braces will clear and that post was April 2010

http://www.r3vlimited.com/board/show...s+brace&page=7

its so close it very hard to tell with out bolting it up. Sorry.

[iwantspeed]

its so close it very hard to tell with out bolting it up. Sorry.

thanks for getting back to me so quickly.
Once it's bolted up,
What could I look for?
What are the differences?
Just more clearance near the lollipop?
Thank you.

[ejnight]

thanks for getting back to me so quickly.
Once it's bolted up,
What could I look for?
What are the differences?
Just more clearance near the lollipop?
Thank you.

yes

[goldtl]

can i get a price for the X brace and skid plate for e30 s52 swap, shipped to 01902?

[ejnight]

can i get a price for the X brace and skid plate for e30 s52 swap, shipped to 01902?

$429 shipped

[JCarp90]

You guys have saved my ass so many times with my skid plate, I fee like I owe it to you to buy one of these. Soon. Very soon. <3

[ejnight]

You guys have saved my ass so many times with my skid plate, I fee like I owe it to you to buy one of these. Soon. Very soon. <3

There in stock and ready to go. :)

[ToPLeSS(e30)FeinD]

price is ok, will be picking up a plate very soon here. wanted a brace as i haz vert, but dont think i will have enough clearance...

[Vivek]

Gonna be picking one of these up probably within the next month.

[ejnight]

All orders shipped. Some stock left. Going fast.

[Bearmw]

So aside from stock or the IE 25mm sway bar will your brace work with any other aftermarket bars without modifications?

[sector6]

are the plates cut on a water-jet? How is that being done?

[ejnight]

So aside from stock or the IE 25mm sway bar will your brace work with any other aftermarket bars without modifications?

but the 22mm IE that I have seen

Every one

are the plates cut on a water-jet? How is that being done?

Laser

[RobE30]

Very cool man. I see the cross brace and a new driveshaft in my cars near future