17x10 & 17x8.5 ESM bbs rs style 002 wheels Official GB*

[widebodye30]

Hey Guys,
Our first GB on the 16x9 002 wheels was GREAT!:)
Since then alot of people asked me to make the 17" 002!

Because there has been alot of interest in the 17" staggered size for the ESM 002, we will set up a GB to see if we can reach the minimum order to get these badboyz made;-)

ETA for the wheels will be about 3-4 months after the GB closing date. Also, a $500.00( non refundable) deposit must be made once GB IS CLOSED!

GB CLOSING DATE: 10.15.2009 WE NEED A MINIMUM OF 30 PEOPLE FOR THE GB.

All wheels will be made in SILVER only and 5x120 & 4x100 will be made for the BMW's;)


17x8.5 ET (??) CB (??) SILVER ONLY FORUM PRICE $195.00 each M.S.R.P. $245.00 each


17x10.0 ET (??) CB (??) SILVER ONLY FORUM PRICE $295.00 each M.S.R.P. $345.00 each

S&H is $145.00 in 48 US states only.


This GB will be set on other BMW forums!!:)

Please give us a call for any questions...
Thanks,
Ary @ EUROSTOP 818.341.9903
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Here are some pixs of our 16" 002 wheel..
Hopefully we can soon get drawing of the 17"!

[nkolesa]

WOW very interested!

[Miasma]

Hats off to you if you can make this happen.

[widebodye30]

Hats off to you if you can make this happen.

We can make it happen if there is enough people interested with paid deposits;)

[MR 325]

Fucking tits!

[bmw325csi]

would that fit regular e30's without mods?

[lifeiskaos]

would that fit regular e30's without mods?

only if you're not very low at all.. basically, the lower you go, the more stretched tires you'll need, and the more fender mods you'll need. this is assuming they pick an offset that puts the rim damn close to the shocks.

i'm interested, but i really really dont think you'll get 30 people interested.

[sennasixty8]

only if you're not very low at all.. basically, the lower you go, the more stretched tires you'll need, and the more fender mods you'll need. this is assuming they pick an offset that puts the rim damn close to the shocks.

i'm interested, but i really really dont think you'll get 30 people interested.

I'm sure Ary is exploring other forums, right?! With all the reps coming from them, they gotta reach out to the other bimmer audiences out there, to make this happen.

[namsayin]

dang haha thats gonna be nice!

too bad im gonna be ordering the real ones here pretty soon ;)

[z31maniac]

ET 20 for the front, and I think ET 20 for the rear as well.

Could we get a set of just the 8.5"s if we didn't want to run a staggered setup? 17 x 10 in the rear requires super stiff springs and a LOT of stretch to fit under a late model arch.

[dude8383]

man i would really love to see how this looks on the car. the 16's looked amazing but 17's might just be enough for me to bite the bullet and hop on this.

[Van Westervelt]

I might be up to snag a set of 17's for my E34 wagon.

[Erick]

et13 for the rear for awesomeness. That's what my Brock B1s are. :)

[golde30]

im interested in some 5x120. if you can get some estimated weights on the wheels that would be awesome. et13 in front for the 8.5" and for the rear, maybe et20?

[widebodye30]

We don't have any weights on the wheels yet... This is more like a feeler and if enough people pay deposits we can make the molds for the wheels and produce the 17" 002's.
We will have drawings and more specs soon!