42 Draft Designs Spacers and Adapters

[nando]

13mm spacers just arrived - they're a work of art! :)

[8380 Labs]

responded to your initial email, did you not get it?

i sent another, thanks jose.

[jizo]

Hey ethan. ....payment sent. Could you give me a heads up???

[nando]

thanks, must have missed the email buried in all the spam. :(

[8380 Labs]

chris, i emailed your tracking info to the email addy you ordered with on monday - looks like it should be there this upcoming monday.

[nando]

hey, I ordered 13mm spacers a couple weeks ago, haven't heard anything. any word on a tracking # or ship date?

[8380 Labs]

bump

[JRYE30]

I went to buy some today from a guy and as he was trying to take them off this happened...it physically broke his alan key socket off! I never did buy them and he will be drilling the bolts out.

Seriously nice product though.

after having these on for a bit over a month, i have one question/concern.

i'm not sure if i'm the only person that had an issue with this, but the nuts tightened themselves to well over 100 lbs/ft after first fitment (i torqued them with a wrench to 75-80 lbs/ft) i don't typically have access to an impact gun, so i attempted to remove them with a 6-point/breaker and ended up nearly rounding off about half the nuts (mixture of very shallow nuts and deep center wheels). i went ahead and purchased some 75mm nuts from motorsport tech (problem solved), but i was a little concerned with how soft the nuts were considering their shallow nature.

[8380 Labs]

got your email, PM and post - replied, thanks. :p

[ghalee30]

pm me please for
4x100 - 5x114.3
57.1 wheel centric.
18mm preferred. won't mind 20mm.
need a pair please.

[rav320uk]

Wouls it be possible for you to PM me again with a price for 4x100 to 5x120 posted to the UK.
I think I deleted your origional PM.

Thanks

[8380 Labs]

the thinnest fully hubcentric spacers available are 13mm, that may be too wide for your needs. you may want to look into having the bores on the wheels machined to 57.1.

[canakami]

I'm thinking about running some 14x7 +19(there's also a +28 but harder to find used) RPF1s. Issue is they're Miata specific hub bore to 54.1. Looking to get some hub centric spacers that'll give me as little poke as possible.

Options?

[8380 Labs]

dave,

send me an email at info@8380labs.com and let me know what you're trying to do, i can help get you sorted.

thanks!

[DaveDel82]

Received mine yesterday, can't wait to install them!

18mm front, 20mm rear:

Wheels specs and can U post pics once installed? I'm looking at buying a pair , just trying to gauge how thick to get wheels flush