42 Draft Designs Spacers and Adapters

[8380 Labs]

top

[8380 Labs]

if you have any offset/application questions, don't hesitate to PM or email me at info@8380labs.com. ;)

[8380 Labs]

PM sent.

[rav320uk]

What's the shipping on the 4x100 to 5x120 18mm to the UK?

Cheers

[8380 Labs]

PM sent.

[Jurt]

Hey I need two sets of 4x100, 10mm and 15mm spacers. How much would it be shipped to calgary Alberta Canada, t3b4p5?

[8380 Labs]

customer car running 16x7 BBS RSs with 18mm 4x100 > 5x120 adapters.

[8380 Labs]

(2) 20mm fully hubcentric 5x120 spacers are $80, (10) extended lug bolts are $30 and shipping is $12.

our paypal is labs_8380@yahoo.com, include all the specs (including your hub and wheel bores) in the comments section when ordering, thanks.

[ninety4e36]

Yes, a pair of 20mm spacers in 5x120 shipped to 91411.

[8380 Labs]

Just 20mm 5x120

Can you clarify?

Fit is awesome! My wheels are similar offset on the same 18mm spacers....its gonna look sooooooo good!

Very nice product! Better that another another similar product sold by another vendor...

I was going to stay away from adapters but this one just made me change my mind.

I'm loving these. I'll be ordering a set in the future.

Thanks guys, these things really are the real deal - and open up a ton of wheel possibilities.

[Jszy25]

I'm loving these. I'll be ordering a set in the future.

[cbouchez]

Very nice product! Better that another another similar product sold by another vendor...

I was going to stay away from adapters but this one just made me change my mind.

[gkurey]

Fit is awesome! My wheels are similar offset on the same 18mm spacers....its gonna look sooooooo good!

[ninety4e36]

Just 20mm 5x120

[8380 Labs]

here's a little tutorial on the mounting of the 4-lug to 5-lug adapters on my very own car.

wheels are 17x8 et20 F and 17x9 et22 R, adapters are 18mm 4x100 > 5x120 all around.


install the kidney-shaped adapter plate. tighten it enough that it stays in place, but can still pop into place in the back side of the adapter body - once it's lined up, torque it down.


once you fit the adapter body on top of the kidney-shaped piece, bolt them together with the two supplied counter-sunk bolts.


affix the rest of the adapter to the hub via the supplied lug bolts.


mount the wheel and bolt it down via the supplied lug nuts.


the results.