42 Draft Designs Spacers and Adapters

[8380 Labs]

10% off all spacers and adapters this August, email us at info@8380labs.com. :)

[8380 Labs]

top

[8380 Labs]

Looks good, thanks for posting up!

[redsubdivisions]

So I installed mine today (finally!). Install was a breeze and although I was on the fence for a while about whether to do it or not, I'm glad I took the plunge and stuck with the E38 style 5's. These are 225/45/16 Nexens wrapped on a 16x8 with 18mm adapters all around on JOM coilovers. I'm honestly hoping to ditch this cheap suspension setup for something "real" in the future. The fronts do not rub at all but the rears do it under anything more than medium load or heavy turns. My car is boosted so I need the meaty tires for traction. I am going to roll the fenders and possibly pull them to (hopefully) alleviate that.









I'm going to try to raise the back up a little bit more (it is already approaching the highest point on the adjuster), and if that does anything I will report back.

[8380 Labs]

top!

[8380 Labs]

Any update? Paid about a week ago. Any tracking number so I can check on it? Thanks.

All the shop guys were at Southern Worthersee last week, so they're a little behind on current orders - sorry for the delay. They're hitting the ground running this week.

[redsubdivisions]

Got it, thanks - will forward tracking info when they go out, should be 3-4 business days.

Any update? Paid about a week ago. Any tracking number so I can check on it? Thanks.

[Steve Corbett]

I have a set of 18mm adapters, trying to determine which wheels to run. Was hoping more people would post pictures of what they are running. I have a set of Borbets, Style 29's and possibly getting a set of DS2's. The wheels I have now are from my E28 and E23 so the tires are too tall, 60 series. Reminded me of my 66 Mustang from high school.

[8380 Labs]

Sent some funds. I need to get my ass in gear with my style 5's that have been sitting in my garage for the past 2 years lol

Got it, thanks - will forward tracking info when they go out, should be 3-4 business days.

[redsubdivisions]

Sent some funds. I need to get my ass in gear with my style 5's that have been sitting in my garage for the past 2 years lol

[8380 Labs]

Any discounts on now? Looking for a set of 18mm 4x100 to 5x120 adapters!

Shoot us an email at info@8380labs.com, thanks.

[Toodaloo]

42 Draft Designs Spacers and Adapters

Any discounts on now? Looking for a set of 18mm 4x100 to 5x120 adapters!

[8380 Labs]

I just had to share my recent experience with 8380 labs customer service...

I have a set of 4x100 -> 5x120 adaptors on my e30 and upon removing to replace rotors realized that one of the kidney shaped mounts/bolt was seized on the rotor. Prior to doing whatever needed to be done to remove, i contact 8380 to source replacement parts thinking i may damage the mounting gear pulling it off. They responded almost immediately and shipped replacement parts under warranty the same day. More than impressed, their excellent communication and super fast response was above and beyond what i was expecting. In this day in age, this type of customer service should not go unnoticed given many of my past experiences with online retailers. I will certainly look to them for any other parts they carry in the future!

Thanks for the kind words, Joey.

[jllphan]

I just had to share my recent experience with 8380 labs customer service...

I have a set of 4x100 -> 5x120 adaptors on my e30 and upon removing to replace rotors realized that one of the kidney shaped mounts/bolt was seized on the rotor. Prior to doing whatever needed to be done to remove, i contact 8380 to source replacement parts thinking i may damage the mounting gear pulling it off. They responded almost immediately and shipped replacement parts under warranty the same day. More than impressed, their excellent communication and super fast response was above and beyond what i was expecting. In this day in age, this type of customer service should not go unnoticed given many of my past experiences with online retailers. I will certainly look to them for any other parts they carry in the future!

[8380 Labs]

:)