::ESM-002R Now Available in 15x8 16x8 16x9 SAME OLD HUGE STEP LIP:)

[SpeedRacer85]

17x8.5, 17x10
Front wheel


Rear wheel

[widebodye30]

:)

[AE86]

You stated 20mm spacer, is that a typo? Final offset would be -5, no? If so, awesome.

Do you guys have any opinions on running these wheels (15x8 ) with 205/55r15 tires?

Thanks for your time and input!

Just mounted a set of 15x8 white on my daily. IM VERY HAPPY WITH THE LOOK:) I have also added 20mm spacer for the fenders but they are a direct bolt-on for the E30.

[ChickenBreast408]

Are the 16x8's available in gunmetal?

Sent from my LS670 using Tapatalk

[johnjohnsons54]

I'm running a lowered e30 on j-stock springs, revalved bilsteins and the original ESM 16x9 et10 002's all around. I love the 002 wheels but I'm just not into the stretched tire look. I bought the car with 205/40/16's on the front and 215/40/16's on the back.

Is it possible to run the new 16x8's all around with 225/45/16's or perhaps 215/45/16's? I think this would be ideal for me, assuming I wouldn't need to run any spacers. FWIW I do have a slight fender roll. Ideally I want to run a flush setup with as much rubber on the ground as possible and not have the rim sticking out beyond the tire.

Could I get away with 225/40/16's in the rear on the 16x9's et10's that I already own? I ask because the 215/40/16's currently on the rear wheels aren't quite wide enough to protect the rim.

Any input greatly appreciated....apologies for the rambling post

[Bmwmotorm52]

Does the 16x9 come in white also?

[Vanos2990]

....son of a. Now I have to get a pair of those 16x8. I wanted that size forever...

[immajackuup]

can't wait for the gold/polish lip to come out in 16x8!!!

[widebodye30]

You stated 20mm spacer, is that a typo? Final offset would be -5, no? If so, awesome.

Do you guys have any opinions on running these wheels (15x8 ) with 205/55r15 tires?

Thanks for your time and input!

yes I installed a 20mm spacer because my fenders are pulled;) 205/20/15 is the right size on the 15x8 wheels.

Are the 16x8's available in gunmetal?

Sent from my LS670 using Tapatalk

All colors will be available end of May;)

I'm running a lowered e30 on j-stock springs, revalved bilsteins and the original ESM 16x9 et10 002's all around. I love the 002 wheels but I'm just not into the stretched tire look. I bought the car with 205/40/16's on the front and 215/40/16's on the back.

Is it possible to run the new 16x8's all around with 225/45/16's or perhaps 215/45/16's? I think this would be ideal for me, assuming I wouldn't need to run any spacers. FWIW I do have a slight fender roll. Ideally I want to run a flush setup with as much rubber on the ground as possible and not have the rim sticking out beyond the tire.

Could I get away with 225/40/16's in the rear on the 16x9's et10's that I already own? I ask because the 215/40/16's currently on the rear wheels aren't quite wide enough to protect the rim.

Any input greatly appreciated....apologies for the rambling post

22/45/16 will work on the 16x8;)

Does the 16x9 come in white also?

^^^

....son of a. Now I have to get a pair of those 16x8. I wanted that size forever...

:)

can't wait for the gold/polish lip to come out in 16x8!!!

^^^

[BamaE30]

Ary,

What is the weight of the 16X8 wheel?

Thanks,

[widebodye30]

Ary,

What is the weight of the 16X8 wheel?

Thanks,

Approximate Wheel Weights: 16x8 = 18lbs. / 16x9 = 19lbs.

[Be30riginal]

where can i get BBS caps to fit the 15x8s ary?

[beamertech08]

I like the 17x8.5 and 17x10 setup they posted can u do a set in 16's and how much would that be

[AlpineWeissIIE30]

I cant wait till the gold ones come in haha

[gtdragon980]

I wish I bought these when I was looking for wheels... :(