Feeler: SS/T DOT Brake Lines from Korman

[asubimmer]

I was wondering if anyone would be interested in Korman's stainless steel/teflon brake lines since there seems to be such a sudden intrest in SS brake lines. I have not talked to them yet but w/out any deal the brake lines are about $75 and about $85 for the ix people. THESE ARE DOT APPROVED!!!!

INTERESTED:
DaveCN
browntown
DaN
Jordan (50 sets)
ACHTUNG
JMe30
Apex381
bmwm3n528
Brew
herragge
T.Dot E30
Eurospeed
E30_pilot
CarsSuck
92 mtechnic cabrio
NC325iC
KangamangusDriver

Remember Intrested does not mean you have to buy anything...this is a feeler ;)

[Dave]

Sounds good. Anyone here with half a brain have some constructive comments about these?

[browntown]

Do they have plastic sheathing? From a post I made in the SS line thread in the appropriate forum, take a look at this:

http://www.nsxprime.com/FAQ/Performance/brakelines.htm

My car is 20 years old with the original lines, I'm pretty much in, I'll give em a whirl if the price is right. Does Korman make them, or are they resold taiwanese specials?

Claiming Interest, Keep us posted

[Jordan]

Korman does not make them.

You could not pay me to do business with Korman.

[asubimmer]

I'm not sure if they make them but if they sell them than you know they are quality ;) I'll ask em for you guys.

[DaN]

put me on the interest list.

[ACHTUNG]

I'm interested.

[DaN]

Whats the status on this?

[bimmer8604]

is it all 6 lines, or just the 4 for the corners.

I will admit, that I was cheap, and only did the 4 corner lines, and not the two on the rear subframe. I didnt have the time nor patience to do it. Besides, those lines looked pretty decent, and were nice and clean. Eventually I'll do them.

Kyle

[asubimmer]

its all 6...I can talk to them tommorro....We will prob need more people it we do a GB

[DrMcDave]

how much for the 4 rear lines for an ix? who makes them for korman? As long as it is a quality company (i assume it is) i will take a set for the rear.

[asubimmer]

how much for the 4 rear lines for an ix? who makes them for korman? As long as it is a quality company (i assume it is) i will take a set for the rear.

I think the ix still has 6 lines...and Korman wouldn't sell them if they weren't quality ;) the ix kit is $85 before a GB.

Is anyone else intrested in a ss brake line GB? We are going to need more intrest to make this happen.

[tonytony]

sounds like a good buy, i've already dropped money into konis so i'm just bumping this

[asubimmer]

so your intrested tonytony?

[parkerbink]

is it all 6 lines, or just the 4 for the corners.

I will admit, that I was cheap, and only did the 4 corner lines, and not the two on the rear subframe. I didnt have the time nor patience to do it. Besides, those lines looked pretty decent, and were nice and clean. Eventually I'll do them.

Kyle

What is the point of doing any if you are not going to do all? NONE. The advantage of the ss lines is they do not expand. If there are still expanding lines in the loop you have negligable change.

This would do well in the 1/2 completed project thread.