PM'd you djmossm42
Announcement
Collapse
No announcement yet.
Shadowline Motorsport - LED Bulbs & Accessories
Collapse
X
-
Soo... Finally got around to doing the install.
Love the colour and spread. Throw isn't great.
BUT I am getting a low beam check light!!! I thought these weren't supposed to do that!
Also, should the lights be facing the sides or up/down? Wasn't sure what would be best.
Sent from my SM-G920W8 using TapatalkLast edited by Mook613; 10-19-2016, 06:07 PM.
Comment
-
Originally posted by Mook613 View PostSoo... Finally got around to doing the install.
Love the colour and spread. Throw isn't great.
BUT I am getting a low beam check light!!! I thought these weren't supposed to do that!
Also, should the lights be facing the sides or up/down? Wasn't sure what would be best.
Sent from my SM-G920W8 using Tapatalk
If you have H1 bulbs, they only face up and down. If you have 9005/6 bulbs, there is a thumb screw that allows you to rotate the base 90°.
As far as errors they should not cause an error in most cases. You are the first person to inform us of this type of issue. I need a little more Info about your vehicle to determine the possible causes. If it is determined to be manufacturing related we can open an RMA for exchange or refund
Regards,
Bryon
Comment
-
Originally posted by djmossm42 View PostPlease provide more details about your headlights and vehicle.
If you have H1 bulbs, they only face up and down. If you have 9005/6 bulbs, there is a thumb screw that allows you to rotate the base 90°.
As far as errors they should not cause an error in most cases. You are the first person to inform us of this type of issue. I need a little more Info about your vehicle to determine the possible causes. If it is determined to be manufacturing related we can open an RMA for exchange or refund
Regards,
Bryon
Suspicion is that the electrical connection isn't 100% tight (haven't had a chance to confirm yet)
Which direction would be ideal, the LEDs pointing to the sides or up/down? I could try just testing both, but typing is easier :)
Thanks
Comment
-
Originally posted by Mook613 View Post9006 bulbs in a US Ellipsoid housing.
Suspicion is that the electrical connection isn't 100% tight (haven't had a chance to confirm yet)
Which direction would be ideal, the LEDs pointing to the sides or up/down? I could try just testing both, but typing is easier :)
Thanks
The manufacturer has canbus modules available so we will have those available in the coming weeks for $20/pair shipped.
Keep us posted!
Thanks
Comment
-
Originally posted by Mook613 View Post9006 bulbs in a US Ellipsoid housing.
Suspicion is that the electrical connection isn't 100% tight (haven't had a chance to confirm yet)
Which direction would be ideal, the LEDs pointing to the sides or up/down? I could try just testing both, but typing is easier :)
Thanks
Comment
-
Originally posted by djmossm42 View PostDid you get a chance to experiment with rotating the base? Electrical connections ok?
Is there a process to have it replaced?
Comment
-
Here is my review on the lights:
They are VERY bright and they piss other drivers off. The only downfall is they throw low beam or high beam faults in my e34. Looking into this further it can be fixed with the proper resistor wired inline. Would and may buy again in the near future for my other vehicles.
Turbo M42 Build Thread :Here
Ig:ryno_pzk
I like the tuna here.
Originally posted by lamboButtchug. The official poster child of r3v.
Comment
-
Originally posted by Mook613 View PostAfter trying to plug/unplug, clean connections, etc. it appears that one of the two bulbs I got is causing the problem and is giving me the 'check' light.
Is there a process to have it replaced?
Originally posted by Dj Buttchug View PostHere is my review on the lights:
They are VERY bright and they piss other drivers off. The only downfall is they throw low beam or high beam faults in my e34. Looking into this further it can be fixed with the proper resistor wired inline. Would and may buy again in the near future for my other vehicles.
Existing customers, please contact me with your order # for a special offer.
Thank you,
BryonLast edited by djmossm42; 04-17-2019, 04:37 PM.
Comment
-
Has anyone installed the light in DEPO smileys??
Would be great to have a build-thread like the one uptop with the foglight.. The thing is, the connection on the round black cap (on the headlight) isn't on the backside, its on the side.. so not too sure the best way to install them..
I'm quite the wrench n00b but any help would be great.
thx
Comment
-
Originally posted by Waffle cone View PostHas anyone installed the light in DEPO smileys??
Would be great to have a build-thread like the one uptop with the foglight.. The thing is, the connection on the round black cap (on the headlight) isn't on the backside, its on the side.. so not too sure the best way to install them..
I'm quite the wrench n00b but any help would be great.
thx
Originally posted by Waffle cone View PostAlso, can someone tell me which of the Blue and White wires are Ground/Power?
UPDATES
A new round is open and this will be the last shipment for the year and will be shipped before Christmas.
You can also buy direct, which means your order is forwarded to the manufacturer for immediate production no minimum. These are on sale for the month of November @ $74.99.
Have A Great Day!
Bryon
___________________________________________
LED Bulbs, Power Window Switches, & Apparel
store.shadowlinemotirsport.comLast edited by djmossm42; 04-17-2019, 04:39 PM.
Comment
-
Originally posted by Robots5 View PostHow to reserve again?
Sent from my iPhone using Tapatalk
You can Register & Reserve Here:
Thanks!
___________________________________________
LED Bulbs, Power Window Switches, & Apparel
store.shadowlinemotirsport.com
Comment
-
Originally posted by Robots5 View PostHow to reserve again?
Sent from my iPhone using Tapatalk
Register & Reserve Here!
Buy 2 or more and get $35 off your order!
___________________________________________
Shadowline Motorsport
LED Bulbs, Power Window Switches, & Apparel
Comment
Comment