New Massive brake kits for e30s

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ron k
    replied
    Lee,

    I have bee following this thread with a lot of interest since I have been looking for a high quality brake upgrade for my 89 325i. It is a street car but I do take it to the track as
    much as I can manage.

    While I am no brake expert, I have been reading
    High-Performance Brake Systems: Design, Selection, and Installation by James Walker (great book BTW) and I wondered if you had any info you could share vis a vis your street setup on a stock (well, I do have the 25mm master cylinder) E30 brake system. Specifically what happens to the brake balance and system gain as compared to stock.


    Thanks,

    Ron Kirkland

    Leave a comment:


  • Massive Lee
    replied
    Glad it works. I was supposed to get a batch of street hats today as the machine shop sent me a lot of stuff. But no hats. They are due for later this week.

    I am currently developping several other projects, including rear 11.75" x 0.81" brakes for e30s (I already have a rear kit for e30 M3s with huge 12.2" x 1.25" discs). The rear ee30 M3 kit comes in two flavor. 4 piston radial mounted 4R/ST caliper ($$$$$) or more affordable 4 pistons lug mounted Superlite forged caliper. here is a development picture. Note that those are not the proper fasteners.



    With radial mounted caliper. In this photo only, using an SL6R for prototyping.
    Last edited by Massive Lee; 01-30-2007, 07:45 AM.

    Leave a comment:


  • pussy
    replied
    Hi Lee

    thanks for your email.

    check the templates on my borbet's A 16"x7.5j with the offset 20 and the street kit with the DNL calipers clears it.

    my friend will be in contact with you on the order.

    many thanks.

    regards.

    waffleswaffleswaffleswaffleswaffles@felix

    Leave a comment:


  • Massive Lee
    replied
    Originally posted by E30 Racer
    Nice looking stuff. How do the weights of the 325i street/race brakes compare to stock?
    Forged Superlite weights 4lbs and 5oz
    HD 11.75" x 1.25" rotor is 10.9lbs
    UL 11.75" x 0.81" rotor weights 8.8lbs

    Don't expect those kits to be lighter than stock brakes. Stock brakes are so flimsy, they belong to a VW Rabbit.

    Leave a comment:


  • E30 Racer
    replied
    Nice looking stuff. How do the weights of the 325i street/race brakes compare to stock?

    Leave a comment:


  • Massive Lee
    replied
    Originally posted by X2theZ3
    Lee,

    I've been following your work since you first started on s14.net. Your work looks great and I like your set up a lot better than any of the others I've seen.

    Once, I get the money, I'll be ordering a kit from you.

    Thanks for the good word. Actually, the long journey started 5 years ago when I showed my friends on roadfly.org and 2002faq.com the brand new brakes that I designed and built for my 2002 racecar. I tested them for two years and made a few sets on demand, plus a few more sets, and more sets, and then for e30s, e36 and M3s...

    Leave a comment:


  • X2theZ3
    replied
    Lee,

    I've been following your work since you first started on s14.net. Your work looks great and I like your set up a lot better than any of the others I've seen.

    Once, I get the money, I'll be ordering a kit from you.

    Leave a comment:


  • JDMpower
    replied
    Originally posted by Massive Lee
    stock 325 mc is about 21mm, m3 is 23.8mm and 750i is 25.4mm
    http://e30m3performance.com/installs.../25mc/25mc.htm

    Thank you very much! Sorry if I asked a stupid (or repeated) question. I am working with hooked on phonics - I will be at the 3rd grade level soon.

    I cannot wait to put these on my car.

    Leave a comment:


  • Massive Lee
    replied
    The patent is not in the assembly of a Wilwood kit, but how the hat is designed. I have seen UUC's kits and most of them use a heavy one-piece rotor.

    Leave a comment:


  • browntown
    replied
    Originally posted by Massive Lee
    This proprietary design (currently in the long and costly patent process)
    Better get on that patent process quick, UUC says their wilwood kit is "coming soon"

    see http://www.uucmotorwerks.com/PBC/fitments.htm

    Leave a comment:


  • netcsk
    replied
    Very nice. I'm throughly impressed by your workmanship and professionalism. Not to mention the good prices.

    Leave a comment:


  • Massive Lee
    replied
    Thanks Georges. My website should be on in a few days. My web guy is working on it tomorrow.

    Leave a comment:


  • george graves
    replied
    Here you all go....Profiles and prices online on a temp page



    Lee - feel free to use this as much as you like, just let me know when your site is up(so I can delete it) or if need any help.

    ...
    Last edited by george graves; 01-27-2007, 06:52 PM.

    Leave a comment:


  • Massive Lee
    replied
    Georges, I will have my website ready in week. All the info will be there. But if somebody wants to host them, I have 5 files that weight 30k each. Too bad this website doesn't support attachements in .pdf format.

    Leave a comment:


  • george graves
    replied
    Very nice looking kit - I can't wait for the reviews to start comming in.

    If you don't already know - it would be very handy to have thoes profiles on your web site - Guys here will quickly start a list of the wheels they fit and wheels that don't.

    someone host these files for the time being....

    ...

    Leave a comment:

Working...