New Massive brake kits for e30s
Collapse
X
-
What kind of testing was done and what life cycle experience do you have with these? -
Front kits only for now. The 0.81" kit works on Kosei K1s. No spacer with the NDL calipers, and 3 or 6mm spacer with the Superlite. Even the the 0.81" kit is not an easy fit-all-wheels.
I have profiles of the brake kits. They are the only sure way to know with which wheels the kits fit. I can email them and they need to be printed at 100% size. Cut them out and apply to your wheels.
With Team Dynamics Pro Sport 1, the 1.25" kit works with the Superlite calipers.
There will be a rear kit, but only for those running 16" wheels.
There will also possibly a cheaper kit with 11.75" x 0.81" for the rear. As say possibly as it is #5 on the list of products to come.Last edited by Massive Lee; 01-21-2007, 06:04 PM.Leave a comment:
-
Just to confirm, you have a racing BBK for an E30 325 with 15" Kosei K1 wheels? Your 325 kit is front only?Leave a comment:
-
:eeek: OMFG! those are freaking awesome!
I think i need to go change my underwear!
now i need to save up money for a set of these.
very nice looking product:)Leave a comment:
-
Hi Luke and e304me
The cost of replacing the two-piece rotor is about $35usd for the 0.81" disc, and $75usd for the 1.25". The 1.25" disc is a very heavy duty rotor, capable of enduring very high heat bursts. THis is a true race rotor. Another UL rotor can be susbituted, but would definitely recommend the HD one.
If you use a stock 21mm MC, you should go with calipers with 1.38" pistons. That will keep the pedal travel within stock configuration. People can also opt for the usual 1.75" pistons calipers along with a 25,4mm MC. as a rule of thumbs, a bigger MC is always better as it limits the pedal travel, at the expense of more pressure required. Size of MC will not affect front-to-rear bias as the same MC applies pressure to both fron and rear calipers.
Those who plan to install a front and rear kit shall opt for 1.75" front and 1.12" rear. Obviously, it is always recommended to fine tune the bias with an adjustable valve.
There is no Power slots (like ATE) but Wilwood makes slotted and drilled rotors, which I do not recommend for racing. They are okay for street though.
In regard of those kits that adapt a one-piston sliding calipers kits, I have a reserve on those. Pedal feel will not be better than with stock brakes. Sliding calipers always have play in the mechanism, they are extremely flexible and will absorb the pressure that should otherwise go to the pad. Also, some kits are known to bend the brackets when the sliding mechanism becomes grippy. There is a well known shop in Los Angeles that was plagued by this problem. I believe they went thru three generations of adapters before they fixed the problem. The only advantage of a sliding caliper is that they are slimmer on the outside, and therefore are easier to fit. The NDL caliper, while not being as stiff as the Superlite Forged, is a better solution than a sliding clamper. It is 5mm thinner on each face and has a smaller radius than the Superlite. Also, it is slightly cheaper than the Superlite and shall only be used with the street if you demand a lot on your brakes. Racers might be disapointed. I don't mean they are bad, only not as stiff.
Billet NDL caliper
Last edited by Massive Lee; 01-20-2007, 06:19 PM.Leave a comment:
-
Lee, is there a "powerslot" type rotor available for the 4 lug kit?
Those are very sexy. Looking at the 300MM.de "kit", I would have a single pot OE caliper and re-drilled Audi rotors.
Your kit, having "hats", thus replaceable rotors, 4 pot calipers (which use a fairly standard fitment of pad, correct?) and is only about $350 more expensive than buying used parts and hacking together odd parts...seems like one hell of a deal.
I did not see a reply to the question of what master cylinder to use.
Luke
Your product is forcing me to rethink my current plan.Leave a comment:
-
Yes, you can buy the installation kit. No caliper, no rotor, no pad.
Installation includes anodized hats, stainless steel brackets (aluminum mounts for the SL6R kits), custom DOT-compliant braided lines, and all fasteners. Install is very easy.
Prices are indicated in the first post.Leave a comment:
-
Superlite Forged is a caliper made by Wilwood and is recognized among racer as being very stiff and the biggest bang for the buck. I will have pictures of the complete kit next week. Currently, all I have is development pictures made this summer. Hats were not anodized, and washers are obviously now replaced by a custom one-piece stainless steel shim. No more hydraulic adapters.
This is pre-prod pictures of the race kit.


Leave a comment:
-
Lee - looks like a nice kit. Not in my track car budget right now, but maybe later this year, or next off season - I've spent enough on the old girl already.Leave a comment:
-
It is a line of Wilwood Brakes. I would also like to know about the Master Cyl. and the proportioning valve. I would love to jump on a set of these. Maybe here soon!Leave a comment:
-
PM me a price on the E21 kits if you don't mind. I have a buddy whop may be interested.Leave a comment:
-
Pix of the calipers and/or kit mounted on a car? Is Superlite the brand of caliper?Leave a comment:

Leave a comment: