GB - Ground Control stuff

[Jean]

If you are not going to run these with camber plates you can use the supplied hats together with the oem strut mounts.

[BUDNUNTA]

Put me on the list.
500/700
What front strut mount do you need to run 2.5" springs?






HUnter

[Jean]

In that case, yes I agree :) Goes w/o saying for pretty much everything, don't half-ass or you'll be doing stuff over later.

[Van Westervelt]

I dont view anything done half assed as being done, so welding is required. :)

[Jean]

It's not a requirement, they aren't going to go anywhere if you don't weld them if you aren't cutting the stock lower spring seat away. It does make for a cleaner look, so yes you should pay someone to do it or do it yourself if you know how.

[Van Westervelt]

Since when do you not have to weld the front collars on?

[Jean]

They don't require any welding, but will give you extra room to adjust if you modify your struts.

[SamE30e]

I'm in for a set of springs.

[Van Westervelt]

wow, $360 for a complete spring+perch set, front and rear? That's a good deal! Do these require welding?

Yes

[CorvallisBMW]

wow, $360 for a complete spring+perch set, front and rear? That's a good deal! Do these require welding?

[Jean]

Ok, so let's start the list of people who are 100% in on this. How about we set the end date as the 21st of this month and see if we get enough people to finalize it.

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

[Jean]

Yes, same ones I had. I sold them as I am buying another set with stiffer rates, my application is a dedicated autox car so the rates I am going with (700 front / 900 rear) are too stiff for DD and also require custom valved shocks.

400-500front / 600-700rear is bareable for a DD / AutoX car. It's up to you though.

[Kwaaahhh]

I'm in for some coilovers! Are you referring to these Jean? http://www.ground-control-store.com/...p/II=121/CA=68

You had a set for sale recently right? What springs rates would be best for the vert?

[BM5W]

interested in coilovers.

[E30nate]

i am for sure interested in camber plates, maybe coilovers.