Can anyone help me know what harness pin is crank position?

[Enriquez2000]

Getting frustrated. Cant find a pinout of the m50 vanos harness and I want to trace my crank sensor to make sure things werent plugged in backwards by previois owner.

Ive tried the ETM but I cant find it... maybe im just frustrated and blinded by seeing red.

Someone please help

[ZinnoSuperEta]

On a M50 tu the crank signal wire is a yellow wire pin 16 on the DME. Crank position ground is a black wire pin 43 on the DME. On the sensor pin 1 is signal pin 2 is ground.

[Enriquez2000]

On a M50 tu the crank signal wire is a yellow wire pin 16 on the DME. Crank position ground is a black wire pin 43 on the DME. On the sensor pin 1 is signal pin 2 is ground.

Thank you!

Dme pins counted right to left?

[ZinnoSuperEta]

Here is a diagram for the pin numbers :)

[Enriquez2000]

Here is a diagram for the pin numbers :)

You the man!

Hoping PO just plugged sensors backwards. Crank sensor ohm'd to 540 so it should be good