4.1 diff with m50 swap speed cut

[Enriquez2000]

This was something a thought that someone heloed me come up with but need your expertise

I recently got everything up and running on this swap but when I plugged in the speed sensor on the 4.1 diff thats in the project I lose throttle at 40mph.

Is there a difference in the diff reading where i need to swap something for this not to happen?

DefinItely seems like a signal issue of some kind.

[DesertBMW]

don't connect the speed signal wire to the DME m3.3 then

[Enriquez2000]

Resolved.... sensor wires were reversed.. swapped and golden now!