Yes, first pic is stage 2, second pic is stage 1.
Anyone running RMS S/C kit?
Collapse
X
-
-
Stage 2 is the only way to go. That aftercooler is teh shizz nizz! :woowoo:Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc
INSTAGRAM: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblIComment
-
does your car still have abs? i can't see the pump under the intake pluming.
the wiring harness looks like the stock s52 harness. are you running obd2 with the super charger? wasn't obd2 tuning software about twice as much as for obd1? that has been my experience from the calls around that i have made.
also, tell me about that custom aluminum tank on the driver side end of the radiator? most of the kits that i have looked at will conflict with the hose outlet on that side of the rad. i was wondering what was done there to get around that?
also, what exactly is an after cooler? same as inter cooler? i have a facelift car and i want to know which inter cooler i can run without conflicting with the brake cooling duct.
someone on one of these forums was selling a used sc kit that he was running on an s52ed e30. i was looking at it pretty closely, but the biggest problem is the software that comes with it would be a really big risk in my opinion. it may work perfectly, but the only way to check it would be to do a dyno run with an air/fuel readout. if it is off, you are looking at 800-1600 bucks to get proper software. it would be stupid to just run it without checking. for the amount he is asking, it would be so much safer to just buy the $3500 kit new and not risk blowing up your engine.Last edited by flyboyx; 06-21-2009, 08:27 AM.sigpic
Gigitty Gigitty!!!!
88 cabrio becoming alpina b6 3.5s transplanted s62
92 Mtech 2 cabrio alpinweiss 770 code
88 325ix coupe manual lachsilber/cardinal
88 325ix coupe manual diamondschwartz/natur
87 e30 m3 for parts lachsilber/cardinal(serial number 7)
12 135i M sport cabrio grey/blackComment
-
Yes it still has ABS, the engine is an S50 and it is OBD1. The tune I just purchased was 800 from Nick G. I am not sure what radiator is installed but I do not believe it is a custom unit.
There should not be any upper radiator hose conflict since the kit is designed for this engine and the E36 radiators will fit in the E30.
The aftercooler is between the charger and the throttle body, it uses coolant to cool the intake air before it enters the intake. There is a pump and a heat exchanger in the bumper which cools the water and pumps it to the aftercooler.
As for you SW comments, I am not sure what you're talking about.
i have a couple of questions:
does your car still have abs? i can't see the pump under the intake pluming.
the wiring harness looks like the stock s52 harness. are you running obd2 with the super charger? wasn't obd2 tuning software about twice as much as for obd1? that has been my experience from the calls around that i have made.
also, tell me about that custom aluminum tank on the driver side end of the radiator? most of the kits that i have looked at will conflict with the hose outlet on that side of the rad. i was wondering what was done there to get around that?
also, what exactly is an after cooler? same as inter cooler? i have a facelift car and i want to know which inter cooler i can run without conflicting with the brake cooling duct.
someone on one of these forums was selling a used sc kit that he was running on an s52ed e30. i was looking at it pretty closely, but the biggest problem is the software that comes with it would be a really big risk in my opinion. it may work perfectly, but the only way to check it would be to do a dyno run with an air/fuel readout. if it is off, you are looking at 800-1600 bucks to get proper software. it would be stupid to just run it without checking. for the amount he is asking, it would be so much safer to just buy the $3500 kit new and not risk blowing up your engine.Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblIComment
-
yeah, now that i look closer at that engine, it is an s50. what are you using for an intake and where is it located?sigpic
Gigitty Gigitty!!!!
88 cabrio becoming alpina b6 3.5s transplanted s62
92 Mtech 2 cabrio alpinweiss 770 code
88 325ix coupe manual lachsilber/cardinal
88 325ix coupe manual diamondschwartz/natur
87 e30 m3 for parts lachsilber/cardinal(serial number 7)
12 135i M sport cabrio grey/blackComment
-
the filter is on the drivers side behind the fog light.Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblIComment
-
God damn it, I want one so bad!Comment
-
Exactly the setup I want to run.Comment
-
Just don't feel like spending another half a months pay on more car crud. Want one as well. M3 is going to shop when i get home off this trip and The 318Ti is theoretically sold.
I hopefully sold my alpine weiss 4 door so that will fund remainder of projects.Comment
-
There are always used ones on BFC. I see them all the time....Turbo E30
Roadkill 80lb 93 octane OBDI tune
BavSol Cylinder Head
Stock S50 in. cam Schrick ex. cam
Otis' tubular T4 manifold
Oringed 87mm S52, Eagle rods and 8.5:1 CP pistons.
GT4094r w/Batmowheel Impeller
614whp@17.5psi, 100 Oct
690whp@21psi, 100 Oct
801whp@27psi, 110 URT
Old: 1/4 mile: 10.91@144.38 (636whp)
New: ?
http://www.youtube.com/watch?v=L_f7fUVqblIComment
-
Check out Undr8d Empire on Facebook: www.facebook.com/Undr8dEmpireLlc
INSTAGRAM: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti by @castromotorsport, @kingsautobodyshop, @bimmerheads, @hardmotorsport, @excel_motorsports & @mateomotorsports - http://www.r3vlimited.com/board/showthread.php?t=371356
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
Comment
-
Bimmerforums is the preferred online BMW Forum and community for BMW owners. At Bimmerforums, you will find technical how-to information maintenance specifics audio advice wheel and tire combinations and model specific details not found anywhere else. Our professionals are here to help make sure you find the answers you need to your questions and our community is here to help other brainstorm ideas for the future.
Bimmerforums is the preferred online BMW Forum and community for BMW owners. At Bimmerforums, you will find technical how-to information maintenance specifics audio advice wheel and tire combinations and model specific details not found anywhere else. Our professionals are here to help make sure you find the answers you need to your questions and our community is here to help other brainstorm ideas for the future.Comment
Comment