Announcement

Collapse
No announcement yet.

wont fit!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    wont fit!

    This sounds really silly. But my new strut brace won't fit on my car. It fits on my other stock e30 but not the 50 swapped. Could the swapped have maybe bent the frame a bit. Its only about half an inch off.

    Thanks!

    #2
    No, the swapped could not have bent the frame.

    Comment


      #3
      Jack up one side of the car.

      Comment


        #4
        Originally posted by Danny View Post
        Jack up one side of the car.
        I think one side must have to be jacked up already, has this car been in an accident?

        Comment


          #5
          My bavauto bar fit on both my cars without jacking up either side.

          Comment


            #6
            I did then the bolt fell. Just had to drop the whole strut and spring. :( its almost as it has caved in but its not far off.

            Comment


              #7
              Originally posted by D-rock View Post
              I did then the bolt fell. Just had to drop the whole strut and spring. :( its almost as it has caved in but its not far off.
              Originally posted by D-rock View Post
              This sounds really silly. But my new strut brace won't fit on my car. It fits on my other stock e30 but not the 50 swapped. Could the swapped have maybe bent the frame a bit. Its only about half an inch off.

              Thanks!
              Does not compute. Why did the "strut cave in" when trying to mount a bar on the top? Pictures?

              Comment


                #8
                No nothing gaved in while doing it. Just seems the car has caved in over time that why it is not fitting.

                Comment


                  #9
                  Has it been crashed?

                  Comment


                    #10
                    Everything looks fine under the car and carfaxs says no. But you can always pay people under the table these days... What's that be the only reason it is not fitting? Even though its only a bit off.

                    Comment


                      #11
                      Sounds like yo shit is fucked den breah.

                      Comment


                        #12
                        Was your old car a cabrio?

                        Comment


                          #13
                          It was a vert and this is a 2 door

                          Comment


                            #14
                            I knew it, There is your issue. The vert and sedan towers are a different measurement. You can't run a vert strut bar on anything other than another vert.

                            Comment


                              #15
                              So they must have sent me the wrong strut!!! Thanks for the help!

                              Comment

                              Working...
                              X