Wire adapter help.

[Mr.SWISS]

Isn't pin 6 the e30 o2 sensor heater relay power? so what you did is use pin 6 on the e30 side to power the diagnostic plug? Or did I fuck my chart up.
Also I have 11-19 for the SI reset, this is just a chart though NOT A TESTED HARNESS.

That was discussed in another thread a week or so ago and I gave the answer.


11-19 is for SI and it does indeed work. I reset my SI on Saturday after the oil change. 1989 325is-1999 e36 M3 OBD2 harness.

[bejbis]

^those charts are wrong. My 2 cents.

Thanks for useless post without any REAL information as to what/why they are wrong, to I assume put your name in a post to sell one of your 24v harnesses.

That being said, the green chart i posted, worked 100% for my 89 325i on my obd1 24v swap.

[328ijunkie]

Your Pin 20 is not right. There was never a brown yellow. Theres red/yellow (which needs +12v for the ABS) that started mid 89, and theres brown all the way up to mid 89. If you add 12V to that youll fry your harness.