Making harness now, have a few questions

[Wh33lhop]

AKGs pin out is terrible... you need to download the ETM for your car and your engine and make your own and compare it with your actual connector.

if your car is an 88 you dont have a c104 which is only 3 pins

Good point. I didn't have my C101 in front of me when I was making the connections. If you do, that's the best thing to cross reference to. Make sure pins and wire colors match up with your chart.

Also, I've found that most of the wire colors in the ETMs are in English, but some are in German (e.g. SW/WS)

SW - Schwartz (black)
WS - Weiss (white)
RT - Rot (red)
GB (I think) - Gelb (yellow)

[r4esh]

I'm still confused on ABS. I have a 89 325is with m52 motor.

[BeirBrennerE30]

does your abs work? do you have a pin in position 20 in your c101? did you read my thread about loving your c101?

[r4esh]

does your abs work? do you have a pin in position 20 in your c101? did you read my thread about loving your c101?

YEah I read that post, but still confused. I do NOT have a pin 20. So it is powered off of its own relay right? and thus doesn't have to be connected to the harness in any way? IS that what I gather? So I do nothing ot it? Thanks.