Clutch slave

[D-rock]

Just a quick question i replaced my MC since it started to leak. Then dot 4 started leaking at the trans right where the fly wheel is. Is this my clutch slave? I have pressure but as soon as all the fluid is out i lose it. I dont want to start replacing parts i really dont need to.


Thanks !!!

[surebimmer]

Sounds like it's leaking from the slave. Make sure the bleeder screw is tight on the slave, its a 6 or 7mm bleeder.

[D-rock]

Sounds like it's leaking from the slave. Make sure the bleeder screw is tight on the slave, its a 6 or 7mm bleeder.

Yes i also used a new screw just incase. But why would the fluid be coming out of the fly wheel ?

[Gnarles]

probably the seals around the slave pushrod are bad. It will leak brake fluid inside the bell housing.

[D-rock]

Cool i will change it and see what happends.

[Adrian_Visser]

Better hope you didn't soak your clutch in brake fluid slippy slippy!

[D-rock]

Should i just do this myself? I did the MC my self i would hat to pay for a tow truck and all that ishh

[ethrty]

yeah do it yourself its not hard. its just bleeding it if you are on your own, though y'all in LHD cars can even probably do that yourself

[D-rock]

Yah i did it took like 45 min thanks a lot everyone!