S50b32

[sonnyqm3]

Do you offer warranties on these motors?

working on that now since I have 2 european guys working at my shop and who are very familiar with these engines. If the motors arrive at my shop not the other buyers location then yes we will inspect them and make sure everything is in good order.

[z31maniac]

well these motors are coming from salvaged vehicles and the companies i work with all pretty relaible. I will try my very best to help out with whatever I can. Buying used anything is taking a risk but I have bought a few and no problems yet...

working on that now since I have 2 european guys working at my shop and who are very familiar with these engines. If the motors arrive at my shop not the other buyers location then yes we will inspect them and make sure everything is in good order.

I asked you a yes or no question.

And I only ask, because I ended up in the same situation, headgasket started leaking within 100 miles of startup.

The 'yard I purchased the motor from sent me a reman'd head, headgasket and gasket set and new head bolts.

[stormspike]

What preventative things did you all do to these motors before install? I want to make sure while it is out of the car to do stuff that is easier (Ie H2O pump, gaskets, any sensors) that would be needed.

thanks!

[sonnyqm3]

z3maniac1,

If I receive the motor first and then shipped to you then yes I will stay behind my product. I will be as supportive as I can if there is any issues with the kits. But if the motor is shipped directly to you from the salvage yard then WE might have to deal with them the source in europe. Like I said we are buying used engines and we just have to hope that we have no problems.

stormpike,

the engine thats in my car, i replaced gaskets,hoses,thermostat,spark plugs and thats it. since everything else looked good. The guy in Maryland who bought a motor from me is very happy with the engine and I am sure he will post pics up very soon.

[stormspike]

Thanks, thats what I thought. I did the same on the S52 (also new starter since its hell to get to after).

[sonnyqm3]

Thanks, thats what I thought. I did the same on the S52 (also new starter since its hell to get to after).

I mean i dont buy smoked out engines like others and sell the parts. I get them in a crate and shipped them to u in the same way that I got it. Unless you want my techs to inspect it... We should be fine and think positive.

[stormspike]

Ive done some searching and have not seen a list of swap parts needed. I know about the Geo booster and issues with the Cyl 6 header. What other things are needed (I have a S52 in now)? Any special wiring issues or is it close to the S52 wireup? Any issues with A/C? Will my lines from the S52 work with the Euro?
Just wanted to make sure i have the parts when the engine arrives.

[sonnyqm3]

its pretty same as the s52 swap with a few minor modifications. I am gonna re do my DS e30 m3 at my shop and will have pics from start to finish. the only thing I wont do is the dme flashing/tuning which i will send out to Mark Dsylva or Oscar Velez in P.R. I will also help out members with info on the tuning as well, wont play middle man on the tuning either. Both mark and oscar do ews delete and sofware tuning on euro dme's...

[M3 euro ltw]

Smoked out engines

I mean i dont buy smoked out engines like others and sell the parts.

Karim,

May I ask why you feel that it is necessary to be critical of other re-sellers of euro parts in order to promote your group buy?

Alex.

[stormspike]

Do you have to do the EWS delete? Will these kits come with the EWS and key, etc? My S52 has the EWS and Terry Sayther in Austin had no issues getting it all wired up and working. He will be doing this transplant.

[M3 euro ltw]

The power of positive thinking....

We should be fine and think positive

I've found that a lot of engines that are being salvaged in europe are coming out of cars that were wrecked. This is based on many years of doing this. Once and a while you get lucky, and a car was wrecked from the back, and the engine is completely unblemished. But M3's are fast cars, driven by people who like to drive them hard, and they tend to leave the road and hit things often... so, not surprisingly, many engines have issues, some obvious, some less so, not to mention the damage a scrap yard might cause themselves during the salvage.

Not surprising, these wrecks can cause damage to throttle bodies, plenums, oil coolers, ps units, engine mount brackets, timing covers, you name it. Shipping damage is a whole issue by itself, and not just crossing the ocean. These pallets are loaded into ocean going ships and not treated gently by any means. I've even inadvertantly caused shipping damage trying to securely strap a motor for cross country shipping, and had the tension of the straps break something. That is life.

Personally I've found it very useful to have extra motors and piles of spare parts available so that when an engine arrives I can replace damaged items, or if a customer reports damage I missed, I can swap out parts for free with them. I don't sell these to my customers, I give them away to make sure they're happy, or include them ahead of time and they don't even realize I've replaced parts from my supplies before they even see the engine. Maybe your pockets are deeper, and instead of buying "smoked" engines, you'll buy new parts from the dealer to replace what your customer needs, or maybe you have confidence that your breakers have piles of spares, and will be happy to ship them for free to your customers based on your word, and that your customers won't mind the delays.

"Thinking positive" has not worked too well for me, and over the years I've lost track of how many items I've had to swap in or out for customers to make sure that when they open their pallet, they're not going to be delayed a few weeks while I try to haggle with the breaker in europe to send replacement throttle bodies or whatever has been damaged.

The BIGGEST problem I have is that I get calls ALL the time, and Emails ALL the time from people who want to buy items from me because they have broken or missing bits from the engines they got on their own. They don't really understand that while I have these spares, I didn't buy them and invest in them for the purpose of reselling them, they're an investment I've made to support my customers when "we should be fine and think positive" didn't pan out.

Your mileage may vary Karim, but personally, I've found it very helpful to have enough parts to probably build 3 or 4 engines scattered between the warehouse, my garage and my basement. The point of this is not to tease people who need spares and didn't buy from me, but rather to point out the level of committment it takes to get this right. Personally, I would suggest you DO buy a couple of "smoked" engines so you've got spares ready when the inevitable happens.

Oh, btw, I think your Group Buy ad is in the "wanted to buy" section.

[sonnyqm3]

Well as I said we are buying used motors and we just gotta hope that we get lucky and have no problems. I am buying a few extra parts on my end just for caution in case if I or anyone else needs any parts. Besides now I have the man power at my shop to rebuild or fix any problems with these motors. Things have changed in my shop in the last month or so and will keep getting better as time goes. Swapping the engine is and was not a problem for me. The only problem i had was with wiring and tuning. Which I have learned and studied every wire of how it works. My GT-1 will be in soon and also a few other gadgets that I have ordered. No just for these motors but for my shop to use..

I am sure whomever is gonna buy these engines with me are gonna be happy like my previous customers and myself with the motor I have in my car...

[Nic01101011]

Compression numbers.... Look very nicely balanced, but agree with comments about a fresh motor having MUCH higher compression for a Euro motor. 11.1 after all! That could still be a very smooth and powerful engine, but if the numbers are real, and the method for measuring them along with the tools being correct and accurate, they are low overall.



The exchange rate is crazy low today, 1.45 for the GBP, no better time to import from the UK where they speak english, not sure what the euro is doing in Germany.

UK engines will be RHD, course, thats not a huge deal, but now may be the time to get German ones if the exchange rate is good there too.

I don't offer Group Buys on Euro motors, but that is an interesting concept. I used to bring these in 5-7 at a time when the exchange rate was 1.7 or even 1.9, it was the only way to cut the expenses down.

Today, heck, you don't need my bulk purchasing/shipping savings or anyone's with the rate at 1.4, its pretty straightforward and affordable. While I don't offer Karim's group buy idea, I can offer a very high level of support, I've been there and done that for years, having installed several of these and coached many people thorugh it.

At the end of the day, its not Rocket Science, and you can probably get all the info from in this forum on your own.

ABLOrignialParts.com has a FAQ which might provide some basic information.

*****
Oh, btw, if you can get an MZ3 coupe/roadster engine that harness is the same for RHD or LHD and lends itself very well to the E30 transplant since you want nicely finished boots to terminate the splice box if you retain it, and pass the dme through the firewall.

Seals -It (*) is a newish product that would lend itself nicely to revising the firewall, and passing the 88pin connector through for you guys. MZ3 mounting tabs could hang the splice box, and it would look nice....Course, the E30M3 parts that tuck all away are VERY nice looking

(*) http://www.sealsit.com Pegasus and Racerparts Wholesale carry these I think, along now with many other vendors.

There 'ya go... value added.

*****edited added******* Holy Cow... Euro is even lower than the GBP, had no idea....

That's what you get for getting your head buried in S54 P&P for a couple months... man, I'm shopping in Germany now.

s50s really cheap in the UK.
You can get one with trans for around 2kGBP.. gotta worry about getting it across the pond though

[sonnyqm3]

here is my a pic of my motor and it runs strong, members from R3V have driven my car at my meets. I am sure they will come and post.

[archie]

Every time I see that motor I get excited! That thing is amazing!!!
Good for you Sonny.