Ok, guys, not sure where to start, but I just got my S52...I need help on where to start. AT a minimum, I would like to get the engine started outside the motor...I already got most of the swap parts...will post pics soon.
Announcement
Collapse
No announcement yet.
/\/\ iii e30 s52
Collapse
X
-
It's possible. In HS, we built a crate for the motor, wired everything up, was able to start the motor and let it run open headers
It's not practical to do it though.I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.
Paypal: vdang5@gmail.com
Delta Auto Care
2875-C Towerview Road
Herndon, VA
703.435.1375
My Feedback Thread: Evil_Twin
Comment
-
I can see how it's done. It's doable. The tricky part will be fuel but it's not too bad.90 E30 S50B30
http://www.fquick.com/roadhazard/
Comment
-
i frequently will run SBC's and BBC's out side of their applications(marine or auto) It is very easy to do on a carbureted engine, and with about 3 wires and a jerry can you can run one. These engines are a little tricker because you are going to need a fuel pump in the system. if you can get a working fuel pump system going, then its really only a case of touching wires to the battery to get the engine running.
Comment
Comment