Taurus fan?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • skatingzooyork
    Wrencher
    • Mar 2010
    • 251

    #1

    Taurus fan?

    Anyone run a Taurus fan instead of the stock aux push fan? I'm looking for a little extra cooling power. A lot of guys run them w/ muscle cars and offroading rigs because of how good they are.

    And if so, is there an easy way to wire one up w/ the stock sensors?
    http://www.jfalesphotography.com
    91 318is m50nv - New toy/project
    95 540i - Wife's DD
  • MR 325
    Moderator
    • Oct 2003
    • 37824

    #2
    Most of us buy a nice aftermarket fan like a Spal.
    BimmerHeads
    Classic BMW Specialists
    Santa Clarita, CA

    www.BimmerHeads.com

    Comment

    • StereoInstaller1
      GAS
      • Jul 2004
      • 22679

      #3
      I don't think you will find too may ford fans here. Couple of Chevy guys, and at least 1 mopar fan, but not so much on the Fords.

      Closing SOON!
      "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

      Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

      Thanks for 10 years of fun!

      Comment

      • skatingzooyork
        Wrencher
        • Mar 2010
        • 251

        #4
        Originally posted by MR 325
        Most of us buy a nice aftermarket fan like a Spal.
        Yeah and I don't blame you but if I could pick one of these up for $20-30, it would definitely be worth it to me because then I could use the extra funds in other needed areas...

        Originally posted by StereoInstaller1
        I don't think you will find too may ford fans here. Couple of Chevy guys, and at least 1 mopar fan, but not so much on the Fords.
        Honestly I can't stand fords - hate them w/ a passion! But a fan that has been proven to be better then a lot of other aftermarket fans (pushing over 3000cfms); can't really be denied especially for the cost.

        And it's not like anyone would see the "ford" part under my hood so I think I could tolerate it, unlike a pair of taurus skirts that so many e30 guys run...
        http://www.jfalesphotography.com
        91 318is m50nv - New toy/project
        95 540i - Wife's DD

        Comment

        • nextelbuddy
          Advanced Member
          • Mar 2010
          • 134

          #5
          Ford Taurus fans are great and i plan on using one as well.

          that fan pulls a lot of amperage though so make sure you use a good relay when installing that fan.

          we wired one up straight up to a battery and it was amazing how high it hovers in place on its own.

          Comment

          • Adrian_Visser
            R3VLimited
            • Jun 2006
            • 2823

            #6
            Hmmm interesting I might have to try this. What model year ford taurus are we talking here?

            '89 Alpine S52 with goodies

            Comment

            • 619E30
              E30 Mastermind
              • Feb 2010
              • 1753

              #7
              Originally posted by skatingzooyork
              Anyone run a Taurus fan instead of the stock aux push fan? I'm looking for a little extra cooling power. A lot of guys run them w/ muscle cars and offroading rigs because of how good they are.

              And if so, is there an easy way to wire one up w/ the stock sensors?
              Fuck Ford
              Originally posted by audiquattrot
              bimmers b4 b*tches....remember that.
              1990 Alpinweiss 325i - secret 500whp build
              2000 Audi S4 B5 Laser Red
              1990 Nissan 240sx - Drift Missile
              2006 CBR600RR

              Comment

              • herlsy
                Grease Monkey
                • Sep 2009
                • 339

                #8
                Originally posted by Adrian_Visser
                Hmmm interesting I might have to try this. What model year ford taurus are we talking here?
                Has to be off the early 90s/late 80s models with the 3.8L engine.

                More info:

                Comment

                • Adrian_Visser
                  R3VLimited
                  • Jun 2006
                  • 2823

                  #9
                  Originally posted by 619E30
                  Fuck Ford
                  A $30 3000 cfm fan is nothing to shake a stick at.

                  That said what are the dimensions? With the 6 cyl. rad the max you can really fit is a 16" afaik. Also if you are going to run the fan in a pusher configuration it needs to be fairly thin doesn't it? I'm not not sure how much difference it makes if you remove the a/c condenser or not.

                  '89 Alpine S52 with goodies

                  Comment

                  • Mako18
                    Mod Crazy
                    • Jul 2006
                    • 688

                    #10
                    After you get the fan then go to www.dccontrol.com get a nice fan controller that is proven reliable, works with a/c electric water pumps...just look!!. I run it on my 5.2l Jeep and it rocks! The Taurus fan is very powerful and $25 at the boneyard, umm hell yeah!! I have found new motors can be had for $15-30 bucks! My e30 is getting one soon!!!
                    sigpic

                    Comment

                    • Dominic49
                      E30 Fanatic
                      • Feb 2007
                      • 1373

                      #11
                      it didnt fit on my swap car

                      Comment

                      • skatingzooyork
                        Wrencher
                        • Mar 2010
                        • 251

                        #12
                        Originally posted by nextelbuddy
                        Ford Taurus fans are great and i plan on using one as well.

                        that fan pulls a lot of amperage though so make sure you use a good relay when installing that fan.

                        we wired one up straight up to a battery and it was amazing how high it hovers in place on its own.
                        Yeah a good relay and wiring is definitely a need!

                        Originally posted by 619E30
                        Fuck Ford
                        Wow thanks for the great information! :roll: I've never heard or said that before myself...

                        Originally posted by Adrian_Visser
                        Hmmm interesting I might have to try this. What model year ford taurus are we talking here?
                        Yep see below
                        vv

                        Originally posted by herlsy
                        Has to be off the early 90s/late 80s models with the 3.8L engine.

                        More info:

                        http://www.fordmuscle.com/archives/2003/02/electricfan/

                        Originally posted by Adrian_Visser
                        A $30 3000 cfm fan is nothing to shake a stick at.

                        That said what are the dimensions? With the 6 cyl. rad the max you can really fit is a 16" afaik. Also if you are going to run the fan in a pusher configuration it needs to be fairly thin doesn't it? I'm not not sure how much difference it makes if you remove the a/c condenser or not.
                        Exactly - as for the fitment, I know the fan is pretty slim but that is partly what I was hoping to hear from on here... I will be picking up one in a couple weeks, so I will have better fitment/measurements details then.

                        Originally posted by Mako18
                        After you get the fan then go to www.dccontrol.com get a nice fan controller that is proven reliable, works with a/c electric water pumps...just look!!. I run it on my 5.2l Jeep and it rocks! The Taurus fan is very powerful and $25 at the boneyard, umm hell yeah!! I have found new motors can be had for $15-30 bucks! My e30 is getting one soon!!!
                        Thanks for the controller link - seems like a decent setup!

                        Originally posted by Dominic49
                        it didnt fit on my swap car
                        What radiator are you running?
                        http://www.jfalesphotography.com
                        91 318is m50nv - New toy/project
                        95 540i - Wife's DD

                        Comment

                        • Adrian_Visser
                          R3VLimited
                          • Jun 2006
                          • 2823

                          #13
                          Originally posted by Dominic49
                          it didnt fit on my swap car
                          Pusher without a/c condenser running late model 6 cylinder rad?

                          That pretty much answers the question then.

                          '89 Alpine S52 with goodies

                          Comment

                          Working...